R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: need Yamaha PM1000 help...?  (Read 1263 times)

Scott Anthony

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
need Yamaha PM1000 help...?
« on: September 05, 2004, 01:04:15 PM »
Hi,

I have a Tascam MX-2424 hooked directly up to a Yamaha PM-1000. The inputs seem to be getting noisier over time, and seems unusable today. There is a low frequency rumbling across all inputs, with a slight wind-like noise.

When I plug other inputs (SM57, sub-outs on my Mackie) into the Yamaha, no rumble.

Puh-leez help...
Logged

Scott Anthony

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: need Yamaha PM1000 help...?
« Reply #1 on: September 05, 2004, 01:11:28 PM »
Further troubleshooting shows it to be the Tascam power supply... weird
Logged

Brian Roth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 913
Re: need Yamaha PM1000 help...?
« Reply #2 on: September 06, 2004, 02:52:56 AM »
Be suspicious of ALL electrolytics in the Tascam supply, and believe it or not, faulty soldering on the power supply board(s).

Bri

Logged
Brian Roth Technical Services
Oklahoma City, OK
www.BrianRoth.com
Pages: [1]   Go Up
« previous next »
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.108 seconds with 16 queries.