Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[MBHeli]

Hi there ,

I own an (old) S200B 24/4/2 console.

Unfortunately I miss the cable between the Power supply unit (PSU)  and the console , due to the connectors it must be a 5 wire one (two 5 pin connectors Typ XLR on both sides) .

Does anyone have information about the routing of this cable ?
(1:1 pinout ? or ...)

Where can I get a schematic (best of the complete s200B)  including PSU wiring scheme

Thanks
Mark

[Andy Peters]

MBHeli wrote on Mon, 29 January 2007 12:07

Hi there , I own an (old) S200B 24/4/2 console. Unfortunately I miss the cable between the Power supply unit (PSU)  and the console , due to the connectors it must be a 5 wire one (two 5 pin connectors Typ XLR on both sides) . Does anyone have information about the routing of this cable ? (1:1 pinout ? or ...)

That cable never had XLR connectors.  It was some kinda locking circular job.

Quote:

Where can I get a schematic (best of the complete s200B)  including PSU wiring scheme

check yer pms.

a

[MBHeli]

Dear Andy ,

many many thanks to you , that´s exactly the information I needed !

(the connector itself is not the wellknown XLR Type , indeed it is a Neutrik switchcraft connector type with a similiar 'frame'  but a changed pin layout ... , I guess it is custom made for soundcraft from neutrik...)

with best regards

mark
(bavaria/germany)