R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: one last attempt to fix my 949....  (Read 2343 times)


  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 366
one last attempt to fix my 949....
« on: January 25, 2011, 02:37:52 PM »

For some reason I am having a tough time giving up on my old 949 (and my Primetime as well).  A few of the functions work properly, but now a few don't.  I am wondering if one of the PROMS is dead or if it may be something fixable.  Here is what's going on:
In GREEN mode:
DELAY- no Display Readout, but passes delayed signal just fine.
REVERSE-no Display Readout and No signal.

RED mode:
Pitch Change- No Display Readout and No Signal
Micro Pitch Change- works fine.

Occasional I get and "1" flashing in the first position (rightmost) in the display.

I've checked the post-regulator voltages and they are within tolerance.  I have never recapped the unit in the 15 years i've had it, but the PSU caps were replaced previously and they look good.

I can limp along with partial functionality, but it would be nice to get the 2 PC fucntions to work.
Thanks very much for any help. (DK, I know you've giving up on these and are now building abstract sculptures with broken units, but maybe you've got a tip for me?)
Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.054 seconds with 22 queries.