R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Mic capsule came loose - how to repair?  (Read 2350 times)

Arjan van Gog

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Mic capsule came loose - how to repair?
« on: May 12, 2007, 06:30:33 AM »

Hi guys,

I have a cheap SuperLux snare mic that I sometimes use for location recording that has had the capsule come loose (completely). The capsule is some kind of plastic and the housing is metal. From the residu it's clear that some sort of adhesive was used to fix the capsule to the housing. Does anybody know what kind of adhesive I could use to repair this mic?



  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1334
Re: Mic capsule came loose - how to repair?
« Reply #1 on: May 12, 2007, 11:16:51 AM »

Try a hot-glue gun. The glue holds up as well as epoxy, and can be easily removed if needed. I use the stuff for stabilizing electronic components all the time (when heat isn't a factor). It's about the same consistency as the epoxy used to hold components together in other microphones (such as the transformers in the SM-57). Just be careful and use as small an amount as possible - you do NOT want to get any on the capsule diaphragm!!!

Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.068 seconds with 23 queries.