R/E/P Community

R/E/P => Klaus Heyne's Mic Lab Stickies => Topic started by: klaus on March 28, 2011, 08:02:43 pm

Title: What is an "M7" Capsule?
Post by: klaus on March 28, 2011, 08:02:43 pm
Originally Posted: Sun, 03 July 2005

This is only a short history of the M7. (For additional info, check some of the Microtech Gefell sites.)
The M7's history, design and description is a bit confusing, because neither Neumann/Berlin nor Neumann/Gefell ever bothered to trademark the capsule. So now several manufacturers freely use the term "M7" without necessarily much regard for authenticity towards the original M7's features, dimensions or materials.
Today, Microtech Gefell (one of the original M7 manufacturers-the other being the old Neumann company which had relations during WWII and after with today's Gefell company and location) and various international capsule manufacturers make capsules that look but don;t necessarily perform, like an original M7 capsule.

To distinguish:
1. The original (Neumann East/West/Gefell) M7 capsule made with PVC diaphragms (ca. 8-10µ thick) is the only one that can in my estimation be legitimately called "authentic". With few exceptions (see below) it has the dimensions, and material characteristics of the original- because it IS the original. But even here, you have versions and generations of the brass back plate design which vary slightly in build, and therefore, tone and character.
(For identification, there are slight design difference among and between Neumann and Gefell back plates. One is visible at the outer edge of the diaphragm: Post-war Neumann/Berlin M7 feature three distinct ridges, where the Gefell M7 to this day have two, just as those found in pre-WWII M7. Then there are different gaps between the ridges and widths of the grooves in between, as well. Another difference is how the sack-holes are arranged.)
2. Various manufacturers (including Gefell) make an M7- looking capsule, using an M7- inspired or copied brass backplate, but using the much easier to manufacture Mylar/Polyester/"PE"- diaphragm (mostly 6µ thin) instead of the very laborious PVC diaphragm.
In the case of Gefell, at least the brass backplate of this polyester capsule is "original M7", whereas all other manufacturers copy, more or less successfully, that backplate design.
If you want the sound of a true M7, there is only one way today to get it: Buy one of the very few, still intact, old stock Neumann/Berlin PVC M7 (made up until 1959), or a Gefell PVC M7 made until about 2005. (Current M7 PVC capsules by Microtech Gefell exhibit noticeable low-end loss, and other timbre changes, due to new PVC material they are using, and the retirement of the long-serving specialist who cast the membranes.)
Everything else, including Gefell's valiant effort of marrying the M7 backplate and diaphragm dimensions with modern diaphragm material using pre-manufactured polyester films, will most definitely sound differently., though not necessarily worse.
Oliver Archut adds this bit of history:
"I would include as "original M7" those made by MWL (Mechanische Werkstätten Lensaal) from 1945 to 1947 for the NWDR. (North West German Radio.) Because after the war the Neumann company was now located in Soviet-occupied Germany, with no access to their West German customers, MWL made these M7s for the (West German) broadcasters to the original Neumann blueprints.  After Georg Neumann moved from temporary headquarters in Gefell back to (West) Berlin, MWL stopped production. Aside of the markings on the MWL capsules, these M7s are absolute identical to the Berlin-made M7 capsules before 1942."
Title: Re: What is an "M7" Capsule?
Post by: radardoug on May 12, 2011, 04:57:27 pm
Thanks for the usefull historical notes. Any chance of some good pictures?
Title: Re: What is an "M7" Capsule?
Post by: klaus on August 05, 2011, 08:05:11 pm
Once the dust has settled with implementing the new software (it's in the website owners' hands), I will try to post all relevant M7-style pictures.
Title: Re: What is an "M7" Capsule?
Post by: didier.brest on August 31, 2011, 04:41:20 pm
Hi Klaus,

did Neumann also manufacture PET M7s as stated here (http://here) ? 
Title: Re: What is an "M7" Capsule?
Post by: klaus on September 12, 2011, 03:38:40 pm
That would be quite illogical, if you look at the history of PET (polyester):  it was only in the late 1950s that researchers found a way to stretch a thin extruded sheet of PET in two directions to create PET film.

This new film became the substrate for Neumann's K47/49 Mylar®-branded polyester film, introduced around 1960, and used in all large-diaphragm Neumann capsules ever since. By the time Neumann used PET/Polyester/Mylar® diaphragms, no more PVC or any other M7-types were manufactured by Neumann, though Microtech Gefell continued using PVC M7 in its inventory, and is making both PET and PVC M7-style capsules through today.

The webpage you cite is not credible for many additional reasons, one of them being that the two M7 capsules and one K47 capsule depicted which supposedly show original-Neumann PET diaphragms are recent Siegfried Thiersch polyester reskins, rather than fifty year old stock diaphragms.

(the pitfalls of the internet: not all that one finds here is authoritative or even credible!)