R/E/P Community

R/E/P => Recording - Engineering & Production => Topic started by: SafeandSoundMastering on March 14, 2012, 06:58:59 am

Title: DAW Gain structure.....
Post by: SafeandSoundMastering on March 14, 2012, 06:58:59 am
I wrote this short article for my site, it may be of interest to engineers starting out.

Gain structure (http://www.masteringmastering.co.uk/gainstructure.html)

cheers

Title: Re: DAW Gain structure.....
Post by: Fletcher on March 14, 2012, 04:16:19 pm
An excellent primer indeed!!  I've seen some pretty weird stuff over the past couple of years... there are many who are actually more advanced  :o that "just starting out" who should read this [and take the information to heart!!!!]... which is why its been made a "sticky".

Peace
Title: Re: DAW Gain structure.....
Post by: MikeRivers on March 20, 2012, 12:09:35 pm
Nice job. I wrote a similar article many years ago (it's on my web site) that explains gain structure primarily from the analog standpoint, since that's about all there was when I wrote it.

All too many beginners complain that their tracks aren't hot enough and every opportunity to explain why (and why they shouldn't be, when first recorded) helps.

Title: Re: DAW Gain structure.....
Post by: SafeandSoundMastering on August 31, 2012, 11:22:30 am
Many thanks for the sticky. :)
Title: Re: DAW Gain structure.....
Post by: remohead on April 14, 2014, 06:10:04 am
Great article! if only more people took the time to understand it properly!

Thanks again,

Remo
http://www.thedenstudios.com (http://www.thedenstudios.com)
http://www.chris-drums.com (http://www.chris-drums.com)
Title: Re: DAW Gain structure.....
Post by: tony void on September 17, 2014, 07:31:17 pm
Very informative. So glad I took the time to read it. Thank you.
Title: Re: DAW Gain structure.....
Post by: KC Brad on November 13, 2014, 05:59:07 pm
Very nicely done.