R/E/P Community
R/E/P => Bruno Putzeys (Designer) - Dave Hecht (Master Tech) => Topic started by: Delete me on January 29, 2020, 11:50:59 AM
-
I have my Blackface Pro Reverb Amp getting some work done on it and the repair guy says I have a single spring reverb tank in it.
Anyone have any info on those? I see info on 2-3-4 spring but no single spring. It's not working so it'll be replaced with a multispring Fender product.
-
Blackface era was a two-spring reverb tank. I have never seen an intentionally made one-spring but I have seen tanks that have lost one whole spring.
-
How does it lose a spring? just sproing off at a connector? ") I'm going to get the old unit back so I'll have a model number of the unit.
-
Springs break off from the end connector. It's soldered through to the brass end cap with a magnet in the center, it moves therefore it can break. Fender uses Accutronics "A" 8 ohm drive coil 2 spring 19" tanks.
I've replaced many over the years with Type 9 three spring models in the medium time constraint. Fender used the long reverb time tanks. Those tanks are available from:
www.allparts.com
-
Here's a pic of that spent reverb tank. Got a new one and had the amp pots cleaned and vibrato fixed stuff back into good shape.
The Pro Reverb sounds great again.
-
It can easily be seen from the picture that the lower spring has broken off at both ends. Accutronics was bought by another company. I think the best available springs now are made by MOD.
-
new 2 spring replacement was only $40 so it was an easy fix to replace.