R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3] 4 5 ... 10
 21 
 on: January 27, 2023, 09:12:04 AM 
Started by radiovinhet - Last post by radiovinhet
I've found this 4 mics on ebay, but the seller don't know anything about it. Could be a good set of mics? German mics? Looks like pencil / shotguns mics. Thanks for your help.

 22 
 on: January 26, 2023, 09:19:56 AM 
Started by toranrt - Last post by jessicavanessa
Nice post you shared for us.

 23 
 on: January 23, 2023, 09:44:53 AM 
Started by vinylwall - Last post by klaus
Good to know, at least that it's an M22x1.
Try that size nut and let us know how it fits.

 24 
 on: January 23, 2023, 08:15:33 AM 
Started by vinylwall - Last post by vinylwall
Thank you for this information.  Take care all.

 25 
 on: January 23, 2023, 03:33:55 AM 
Started by vinylwall - Last post by schneidm
Hello,

the part was provided by Tuchel. The historical documentation just specifies: Tuchel T2810 M 22x1, compression moulded nut, without any further details.

Best regards,
Martin Schneider
Acoustics Development
Georg Neumann GmbH

 26 
 on: January 22, 2023, 06:40:27 PM 
Started by vinylwall - Last post by klaus
I measured several NOS Tuchel inserts, both, threads on male connectors and female nuts (!), and found a clear match only for the pitch: 1.0MM
But metric tables are a bit less definitive about any M-designation (metric), see table, and I found nothing for inch/Whitworth correlates.

Here is what I measured:
OD of the male connector: one of them is 21.60mm black, NOS original), another (newer, NOS Amphenol-made) 21.74mm
ID of the original nut: 20.91or thereabout for both versions.

The metric thread table below identifies the closest match as "M22x1 6e"
Inch table have only 7/8" in the general vicinity but nothing close. I also perused a Whitworth table and nothing there either.

I will contact Martin Schneider of Neumann to find out what they may have.

 27 
 on: January 22, 2023, 02:33:45 PM 
Started by vinylwall - Last post by vinylwall
Hello all.  I'm hoping someone can tell me the size and thread count of the jam nut used to mount the Tuchel connection into the bottom bell of a U47/U48.   ???   Thank you.

 28 
 on: January 19, 2023, 10:53:07 AM 
Started by madisoncarr - Last post by sheryldixon
The skills required to play poker are the same as luck. They also involve the subtlety of being able to appreciate all that is going on and being able to make the right decision. But poker also has disadvantages. These I will talk about at https://www.thenexthint.com/vital-information-about-poker-in-au-to-hone-your-skills/21525/. You could say it's a good and a bad start to encounter this art. In fact, any poker player thinks he is as wise, strong, and knowledgeable as he has the nerve to believe he is.

 29 
 on: January 19, 2023, 10:51:13 AM 
Started by madisoncarr - Last post by madisoncarr
What is the format of the casino game? And what do I have to pay attention to?

 30 
 on: January 17, 2023, 06:54:18 PM 
Started by brucekaphan - Last post by soapfoot
Any recommendations for cloth bags, sleeves, or anything nicer-looking than plastic?

Pages: 1 2 [3] 4 5 ... 10

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 15 queries.