compasspnt wrote on Fri, 13 March 2009 02:54 |
They sure look familiar, like home. Ardent surely has some documentation in their files. I'll send them a note to check for you. T |
Bob Olhsson wrote on Sat, 14 March 2009 12:36 |
I'd be willing to bet than most of the mods were necessary to keep out RFI. The complete consoles were supposed to be OK but integrating the components with other gear was notorious for RFI train wrecks. |
trunkline wrote on Mon, 28 December 2009 10:35 |
I've been working on figuring out my modules (pictured above), so I thought I'd drag this thread back up. The amp cards, it turns out, run on +/- 24V, and the modules have been modded to deal with that. I've managed to get audio out of a couple of the modules(yay!), and it sounds good. However, there should be more than one out, & I only have the one--I've got eq, but no output level controls at all--the fader, cue pot, & echo pot have no impact. I thought I had sussed out the different outputs, but I'm getting nothing. I'm wondering if anyone knows the module pinout, so I could check my work & see if I'm missing something. Any help/suggestions would be most welcome. Thanks Tom |
mjgreeneaudio wrote on Wed, 30 December 2009 00:29 |
...the original owner... |
James Craft wrote on Fri, 08 January 2010 13:16 | ||
Those modules on the first page look like the ones from Ardent's "B" studio console back in the late 70's - early 80's. Those do not look like 101's in your module, some kind of mod I suppose. One things for sure, the original 101 cards were +24 volt only, not +/- 24 volts which would seriously damage the cards. The 110s are +/- 15 to 18 volts. |
compasspnt wrote on Fri, 08 January 2010 21:09 | ||
That would be William Dilly. |