R/E/P Community

R/E/P => Bruno Putzeys (Designer) - Dave Hecht (Master Tech) => Topic started by: radardoug on October 01, 2016, 04:37:33 PM

Title: Hypex modules in Samson equipment
Post by: radardoug on October 01, 2016, 04:37:33 PM

I am having trouble with a Samson Expedition 1000 that I am trying to fix. The unit has 2 Hypex class D modules for power amps. These are not going. But it appears that the modules are probably being stopped from running by the on/off line from the Hypex power supply. Samson have given me a diagram, but the amps and power supply are shown as blocks. Hypex wont give me information. Bruno, I beleive you work for them. The power supply is supply main rails to the modules, but I dont know the right logic conditions for the on/off and dc fault rails.

Title: Re: Hypex modules in Samson equipment
Post by: lucyda on February 09, 2017, 11:45:15 AM

not sure whether you need it or not but still those who may need some help with their XP1000 can check this manual (http://www.samsontech.com/site_media/support/manuals/XP1000_OM_EN_1.3.pdf)..probably there you will find some answer...best