R/E/P Community
R/E/P => Klaus Heyne's Mic Lab => Topic started by: gtoledo3 on August 22, 2022, 10:57:47 PM
-
https://imgur.com/gallery/mDaIOyW (I couldn’t get the image embedded!)
Has any company made this as a reproduction part? I would guess no, but I figured it was worth asking.
Is that material torn inside around the capsule, thin wire mesh?
Is the sponge looking material, and I guess same as what originally goes around VF14, the material that vendors usually call “orange open rubber”? ( https://therubbercompany.com/sponge-foam/natural-rubber-sponge-sheeting/orange-open-cell-sponge-sheet )
Is the plastic holding the capsule likely plexiglass?
-
Answers in sequence:
No
Yes
Yes
Perspex/Plexiglas
-
Thank you Klaus!
Interesting coincidence that Beyer used a headbasket with similar shape for their first condenser.