R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: weird RNC problem?  (Read 1598 times)

aeser

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
weird RNC problem?
« on: July 12, 2005, 10:11:42 AM »
we're in the studio all week, trying to run some drum tracks through my RNC and i'm getting no signal out of it, when you hit "bypass" you get sound, when you switch off bypass you get nothing, any idea what this could be?
Logged

Greg Thompson

  • Full Member
  • ***
  • Offline Offline
  • Posts: 101
Re: weird RNC problem?
« Reply #1 on: July 12, 2005, 06:57:58 PM »
check your patching.  the jacks are ch 1 in/out channel 2 in/out.
I had an assistant wire mine up on a session and he'd wired it ch 1/2 in, ch 1/2 out and it didn't pass signal except in bypass.  I was thinking it was a balanced/unbalanced problem.  At the end of the session I investigated and said "oh duh".. miswired.
Logged

aeser

  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: weird RNC problem?
« Reply #2 on: July 13, 2005, 06:34:53 AM »
uh, turns out we were using the wrong wall wort.  Embarassed
Logged
Pages: [1]   Go Up
« previous next »
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.1 seconds with 21 queries.