Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[AB7]

Dan - I have the Lavry Blue Ad/da/
I have a Lynxone sound card (about 5 years old) BUT it has AES in an out and an clock in and out.
Two questions:
1.  Will the card degrade the Lavry sound if I am using the Lavry as an external/digital clock slaving the Lynxone?
2.  Should I use the thin clock cables that came with the Lynxone, OR should I use the AES in for syncing AD and DA from the Lynxone?
THANKS,
ALAN
here is the link to the Lynxone for specs:
http://www.lynxstudio.com/lynxone.html

[danlavry]

AB7 wrote on Wed, 08 June 2005 05:00

Dan - I have the Lavry Blue Ad/da/ I have a Lynxone sound card (about 5 years old) BUT it has AES in an out and an clock in and out. Two questions: 1.  Will the card degrade the Lavry sound if I am using the Lavry as an external/digital clock slaving the Lynxone? 2.  Should I use the thin clock cables that came with the Lynxone, OR should I use the AES in for syncing AD and DA from the Lynxone? THANKS, ALAN here is the link to the Lynxone for specs: http://www.lynxstudio.com/lynxone.html

I would set the AD to internal clock, and set the Lynx to receive the signal directly without a clock cable. For the DA, jut have the Lynx drive the DA.

I recently restarted a forum on my site and there is a massage there with more detail about your question. The question was about clocking to protools, but the answer is general enough to cover your question:

http://www.lavryengineering.com/lavry_forum/viewtopic.php?t= 7

Regards
Dan Lavry
www.lavryengineering.com