R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: CAD Equitek E-300 strange output  (Read 1240 times)

wilbur m.

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
CAD Equitek E-300 strange output
« on: May 31, 2005, 04:20:21 PM »
hey, all.  my E-300 is cycling a 'whooshing' sound in audio output.  I tried powering down 48V a couple of times, to no effect.

It strikes me as a 48V problem (not enough power to the mic) but the mic has the same problem with 3 different phantom power sources.  thoughts?
Logged
Proudly ham-fistedly producing and engineering since 1978.

Scott Helmke (Scodiddly)

  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
Re: CAD Equitek E-300 strange output
« Reply #1 on: May 31, 2005, 04:48:18 PM »
Needs a new pair of those NiCd internal batteries, maybe?
Logged
http://www.scotthelmke.com/team-downbeat-1.jpg

tom eaton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3640
Re: CAD Equitek E-300 strange output
« Reply #2 on: June 04, 2005, 08:13:17 PM »
Sounds like the right starting place to me.  I have three E350s here and the batteries are the only things that have ever caused problems.

-tom
Logged
Pages: [1]   Go Up
« previous next »
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.065 seconds with 18 queries.