R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: "Active Speaker" Selector.  (Read 2085 times)

Fali

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
"Active Speaker" Selector.
« on: May 08, 2005, 12:11:28 AM »

hi,
I have a pair of MSP5a, and a pair of HR624.
I am using an onxy 1640. Want both these speakers to be controlled by the Control Room out Volume control.  

Both speakers accept +4 Balanced XLR inputs.

Any Ideas ?

Thanks
Fali

Logged

Brian Roth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 913
Re: "Active Speaker" Selector.
« Reply #1 on: May 08, 2005, 12:32:20 AM »

A pair of 4PDT switches mounted in a metal box should fix you up; one switch per set of monitors.

Bri

Logged
Brian Roth Technical Services
Oklahoma City, OK
www.BrianRoth.com

Fali

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: "Active Speaker" Selector.
« Reply #2 on: May 08, 2005, 01:13:37 AM »

hi Brian..
That was that first think i thought of.
Any issues of loss, that i should consider ?

Logged

Brian Roth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 913
Re: "Active Speaker" Selector.
« Reply #3 on: May 08, 2005, 01:35:52 AM »

Nope, shouldn't be an issue.

Wire the switches so that the "destinations" come off the switch wipers, and the contact poles such that the amplifier inputs are shorted when not in use.

Bri

Logged
Brian Roth Technical Services
Oklahoma City, OK
www.BrianRoth.com

Fali

  • Newbie
  • *
  • Offline Offline
  • Posts: 10
Re: "Active Speaker" Selector.
« Reply #4 on: May 08, 2005, 01:45:01 AM »

Thanks will try that then
Fali
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.074 seconds with 20 queries.