R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: A80 remote led numbers  (Read 1064 times)

jsel84

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
A80 remote led numbers
« on: April 06, 2005, 03:22:09 PM »

Hi john
the lower left dig-et on  all the numbers on my remote is out.
But some times they come on for a few hours.
I've cleaned all the sockets and check all the cables but no luck.
I would love to get the print out for this. I can't find it in my Studer service book. Would you know what can cause this or what chip it is or transistor it my be.Any advise??
Regards
Jim
jsabella@optonline .net
Logged

John Klett

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 475
Re: A80 remote led numbers
« Reply #1 on: April 06, 2005, 10:04:32 PM »

Hi Jim

I can't remember how old your A80 is but in any case the first thing I would look for is crud.  I recall that in older versions of that remote the "box" was a number of boards held together with Molex connectors and those would get cruddy and you'd loose a a segment or multiple segements all the same in all the number places... so...  crud, or the pseudo-medical name "Molexia" would be my first guess

how's the 8068?

Logged
John Klett / Tech Mecca
http://www.technicalaudio.com

jsel84

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: A80 remote led numbers
« Reply #2 on: April 07, 2005, 05:33:57 PM »

Hey John
I've cleaned all the chip sockets and re seated them.
I will trying cleaning the molex conectors.
Do you know where i could find the print out for this box?
The neve is doing fine, I've been running 15 ips and I have to say with GP9 it sounds unreal so fat. I almost fool myself on play back I think the band is playing and look  and see its tape.
regards
jim
Logged

jsel84

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: A80 remote led numbers
« Reply #3 on: April 10, 2005, 02:00:50 PM »

Hi john
I cleaned all the molex conectors, no luck.
Where can I find the printout for this or to get this fixed??
jim
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 19 queries.