R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: original U47 M7 mount  (Read 307 times)

gtoledo3

  • Full Member
  • ***
  • Online Online
  • Posts: 119
  • Real Full Name: George Toledo
original U47 M7 mount
« on: August 22, 2022, 10:57:47 PM »

https://imgur.com/gallery/mDaIOyW (I couldn’t get the image embedded!)

Has any company made this as a reproduction part? I would guess no, but I figured it was worth asking.

Is that material torn inside around the capsule, thin wire mesh?

Is the sponge looking material, and I guess same as what originally goes around VF14, the material that vendors usually call “orange open rubber”? ( https://therubbercompany.com/sponge-foam/natural-rubber-sponge-sheeting/orange-open-cell-sponge-sheet )

Is the plastic holding the capsule likely plexiglass?
Logged

klaus

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2107
Re: original U47 M7 mount
« Reply #1 on: August 23, 2022, 02:25:43 AM »

Answers in sequence:
No
Yes
Yes
Perspex/Plexiglas
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com

gtoledo3

  • Full Member
  • ***
  • Online Online
  • Posts: 119
  • Real Full Name: George Toledo
Re: original U47 M7 mount
« Reply #2 on: August 23, 2022, 01:19:10 PM »

Thank you Klaus!

Interesting coincidence that Beyer used a headbasket with similar shape for their first condenser.
Logged
Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.138 seconds with 24 queries.