R/E/P Community
June 17, 2024, 02:36:11 PM
Welcome,
Guest
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
R/E/P Community
>
R/E/P
>
Klaus Heyne's Mic Lab
(Moderator:
klaus
) >
original U47 M7 mount
« previous
next »
Pages: [
1
]
Go Down
Print
Author
Topic: original U47 M7 mount (Read 707 times)
gtoledo3
Full Member
Offline
Posts: 150
Real Full Name: George Toledo
original U47 M7 mount
«
on:
August 22, 2022, 10:57:47 PM »
https://imgur.com/gallery/mDaIOyW
(I couldn’t get the image embedded!)
Has any company made this as a reproduction part? I would guess no, but I figured it was worth asking.
Is that material torn inside around the capsule, thin wire mesh?
Is the sponge looking material, and I guess same as what originally goes around VF14, the material that vendors usually call “orange open rubber”? (
https://therubbercompany.com/sponge-foam/natural-rubber-sponge-sheeting/orange-open-cell-sponge-sheet
)
Is the plastic holding the capsule likely plexiglass?
Logged
klaus
Moderator
Hero Member
Offline
Posts: 2238
Re: original U47 M7 mount
«
Reply #1 on:
August 23, 2022, 02:25:43 AM »
Answers in sequence:
No
Yes
Yes
Perspex/Plexiglas
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com
gtoledo3
Full Member
Offline
Posts: 150
Real Full Name: George Toledo
Re: original U47 M7 mount
«
Reply #2 on:
August 23, 2022, 01:19:10 PM »
Thank you Klaus!
Interesting coincidence that Beyer used a headbasket with similar shape for their first condenser.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
R/E/P Community
>
R/E/P
>
Klaus Heyne's Mic Lab
(Moderator:
klaus
) >
original U47 M7 mount