I am using an AKG 535. I want to reduce the high frequencies above 7k by about -3db.
To remove the exaggerated high end of this mic to flatten the upper frequency response ( or cut everything off about 6 or 7k ).
Ideally
- BEFORE signal reaches the mixer, preamp or a/d converter
- that maintains high quality signal, albeit darker
I am imagining passive solutions such as:
- adding lots of foam
or
- a passive device or filter I can plug XLR into?
or
- an inexpensive mic mod that any experienced local tech can do
Application is vocal 1-3 inches from mic. Normally I go into Logic and monitor post eq which is a fine solution. But sometimes I do live streams or zoom online and I don't have control over signal.
Does anyone have a suggestion other than changing the mic?
Thank you for considering
Paul
WEEKEND WARRIOR