Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[klaus]

Very easy. Bridge the pads either with a fat drop of nicely flowing solder that will flow to both solder points (visible under each resistor) or remove the resistors and solder a small piece of wire across the two solder points

[Hermetech Mastering]

Very easy. Bridge the pads either with a fat drop of nicely flowing solder that will flow to both solder points (visible under each resistor) or remove the resistors and solder a small piece of wire across the two solder points

Thanks Klaus. If I posted pics of my KM84s internals, would you be able to tell me what the ohm output strapping was, and if the pads had already been bridged?

[aget342]

Any updates on this?

[Derek Samuel Reese]

I have a u67 and was considering buying a tree audio branch II tube mic preamp, it has three different input impedance’s,
37.5
150
And 600.
Are all of these impedance’s safe to use with my u67 ?