Hi folks, we are setting up a Sony PCM-1630 playback rig for Archival work. We have a PCM-1630, DMR-2000 and the DTA-2000 error checking unit.
However there is a cable which connects the DMR-2000 and the DTA-2000 which we don't have, and getting information about it seems very difficult. It's a 33-pin black plastic body connector (DMR-2000 remote) to 36-pin Amphenol (DTA-2000 'VTR' connector). All we have is the attached pic - someone has chopped the original cable.
The manuals for the DMR and DTA both have 'pin assignment' tables but no actual cable interconnection diagram, and it's impossible to determine which logic line from the DMR should connect to whichever one on the DTA.
Wondering if (a) anyone might have a cable they could sell us, or (b) a working cable that we could copy the connections from. We can operate the system without it, but it is needed for the DTA to display timecode during spooling.
Any suggestions gratefully received!