R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Hypex modules in Samson equipment  (Read 6957 times)


  • Full Member
  • ***
  • Offline Offline
  • Posts: 100
  • Real Full Name: Doug Jane
Hypex modules in Samson equipment
« on: October 01, 2016, 04:37:33 PM »

I am having trouble with a Samson Expedition 1000 that I am trying to fix. The unit has 2 Hypex class D modules for power amps. These are not going. But it appears that the modules are probably being stopped from running by the on/off line from the Hypex power supply. Samson have given me a diagram, but the amps and power supply are shown as blocks. Hypex wont give me information. Bruno, I beleive you work for them. The power supply is supply main rails to the modules, but I dont know the right logic conditions for the on/off and dc fault rails.


  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Real Full Name: Lucy Davitson
Re: Hypex modules in Samson equipment
« Reply #1 on: February 09, 2017, 11:45:15 AM »

not sure whether you need it or not but still those who may need some help with their XP1000 can check this manual..probably there you will find some answer...best
a hyper fast essays expert
Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.022 seconds with 21 queries.