R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Disassembling a UM70  (Read 2725 times)

Terry

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Disassembling a UM70
« on: May 19, 2014, 05:31:41 PM »
Hello,

Does anyone have ideas about how to remove the plastic "plugs" from the pattern select ring of a UM70, while doing the least damage to them?

I need to disassemble the housing and hate the idea of irreversibly marking it.

Thanks in advance,

Terry Setter
Logged

klaus

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2221
Re: Disassembling a UM70
« Reply #1 on: May 19, 2014, 06:06:14 PM »
Hello Terry,
You may have more luck with your inquiry if you would mention your real, full name, as required by this forum.
Thanks,
KH
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com

Terry

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Disassembling a UM70
« Reply #2 on: May 20, 2014, 01:09:56 AM »
Dang! I even re-read the posting rules before writing.

I agree that we should all step up and be responsible about our posts.

Regards,

Terry Setter
Logged

hasbeen

  • Newbie
  • *
  • Offline Offline
  • Posts: 44
  • Real Full Name: Troy Douglas Sutler III
Re: Disassembling a UM70
« Reply #3 on: May 20, 2014, 11:32:44 PM »
I used a very small flathead from some jewelers screwdrivers set. They came out fairly easy and I replaced them afterword.

YMMV
Logged
Who Is John Galt?

Terry

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Disassembling a UM70
« Reply #4 on: May 21, 2014, 11:38:31 AM »
Will try, much appreciated!

Regards,

Terry Setter
Logged
Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.11 seconds with 22 queries.