R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: What mics was the Neumann PSU NN 48 b designed for?  (Read 1723 times)

mike_mccue

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
What mics was the Neumann PSU NN 48 b designed for?
« on: February 01, 2014, 07:08:59 pm »

Hi,
 What mics was the Neumann PSU NN 48 b designed for?

 I know it's sort of an abstract question, but I have been looking at different power supply schematics and sometimes I forget to consider how their designs have context to the mics.

 Thank You.
Logged
Mike McCue
Tallahassee Florida USA

klaus

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1824
Re: What mics was the Neumann PSU NN 48 b designed for?
« Reply #1 on: February 01, 2014, 09:38:04 pm »

The context is always the tube that is used in a particular mic model. You can use the NN48 with all mics that use the AC701 tube.

Some mics work without adaptation of the connector [M(2)49, M(2)50, KM(2)5x, KM5x, others may require mounting an extra connector or reassigning connector pins, or adding components (Schoeps M221, AKG C60).
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com

mike_mccue

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
Re: What mics was the Neumann PSU NN 48 b designed for?
« Reply #2 on: February 01, 2014, 09:43:25 pm »

Thanks Klaus,
 I saw the 4 volt heater output but didn't want to presume I knew enough to conclude it was for the AC701-K.

 Thanks for the list.

 Best regards,
Mike
Logged
Mike McCue
Tallahassee Florida USA
Pages: [1]   Go Up