R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Chinese Shockmounts for Neumann Mics: Good Enough?  (Read 10064 times)

AusTex64

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 75
  • Real Full Name: Robert Mokry
Re: Chinese Shockmounts for Neumann Mics: Good Enough?
« Reply #15 on: March 16, 2014, 11:00:11 PM »
The solution to not stripping the threads on mic clips and suspensions are Atlas LO-2B quick release adaptors. They rock! Makes it so quick to swap out mics too.
Logged

Rick Sutton

  • Newbie
  • *
  • Offline Offline
  • Posts: 35
Re: Chinese Shockmounts for Neumann Mics: Good Enough?
« Reply #16 on: March 17, 2014, 02:22:53 AM »
 If you use LO-2 stand adapters make sure you wire tie the cabling of your mic to the stand/boom to serve as a "safety". Just the slightest touch can send your classic mic plummeting to the floor with an LO-2 without back-up securing. They don't call them "quick" for nothing!
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.061 seconds with 23 queries.