R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Remote scene change on 01v96  (Read 2402 times)

lifescape

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • Real Full Name: Mike Swanson
Remote scene change on 01v96
« on: February 02, 2013, 06:05:46 PM »
Hi,
Not sure if i.m in the correct place here but could do with a little advice or pointing in the right direction.
I need to remotely control scene change on the 01V96. i have been looking at various midi controller options but really only need the option of selecting up to 8 scenes (as you would from the console directly) but remotely.
Wired via midi or usb ? but there will not be a PC available so ipad options not suitable.

Any ideas much appreciated.

Mike
Logged

Fletcher

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 590
Re: Remote scene change on 01v96
« Reply #1 on: February 03, 2013, 11:44:01 AM »
I got nothing... perhaps check with Yamaha?  For all I know there could be an iPad app for that...
Logged
CN Fletcher

mwagener wrote on Sat, 11 September 2004 14:33
We are selling emotions, there are no emotions in a grid

"Recording engineers are an arrogant bunch. 
If you've spent most of your life with a few thousand dollars worth of musicians in the studio, making a decision every second and a half... and you and  they are going to have to live with it for the rest of your lives, you'll get pretty arrogant too.  It takes a certain amount of balls to do that... something around three"
Malcolm Chisholm

lifescape

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • Real Full Name: Mike Swanson
Re: Remote scene change on 01v96
« Reply #2 on: February 03, 2013, 07:08:25 PM »
Hi,
Thanks for the reply, i..l have to check with the yamaha see if they have any ideas.
There are apps available but its no good for this applications as there isnt any pc available to connect to.

Thinking of seeing what i can find midi controller wise to send midi commands to the 01v96
and hopefully allocating the commands to scene changes.

Thanks any way.
Mike
Logged

Fletcher

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 590
Re: Remote scene change on 01v96
« Reply #3 on: February 04, 2013, 10:58:16 AM »
I don't know what your show is... but... is there any way to run SMPTE time code through the show?  If there is then it can do both sound and lights at the same time [which could be helpful... or not... like I said - don't know what your show is].

Peace
Logged
CN Fletcher

mwagener wrote on Sat, 11 September 2004 14:33
We are selling emotions, there are no emotions in a grid

"Recording engineers are an arrogant bunch. 
If you've spent most of your life with a few thousand dollars worth of musicians in the studio, making a decision every second and a half... and you and  they are going to have to live with it for the rest of your lives, you'll get pretty arrogant too.  It takes a certain amount of balls to do that... something around three"
Malcolm Chisholm

lifescape

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • Real Full Name: Mike Swanson
Re: Remote scene change on 01v96
« Reply #4 on: February 04, 2013, 02:35:39 PM »
Yea Sorry should have said......

In his instance the 01v96 is part of a system installed for end users.  Music group meetings, readings, etc.

We set up scenes for the various options they require and it would be very usefull just to have a
remote control option to change scenes. ie Without having to go to the mixer which is not local to the performer/speaker.  Most times there will not be anyone available to do any adjustments.

I'm looking into the 01v96 tech spec at moment to see what we could try.

Many thanks
Mike
 

Logged
Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.05 seconds with 22 queries.