R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Mic Stand/mount part ID Help Please  (Read 3597 times)

Malotki

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
  • Real Full Name: David Voyd
Mic Stand/mount part ID Help Please
« on: March 07, 2013, 12:48:42 PM »

Hello All

Trying to find out what part this is ? see attachment It has a thread with adapter in the bottom for a mic stand etc and Germany sticker on the side ( pre or ww2 most probably ? I think ? ) Neumann or Tfunken ? Any help much appreciated.
Cheers

D
Logged

klaus

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2108
Re: Mic Stand/mount part ID Help Please
« Reply #1 on: March 07, 2013, 01:26:33 PM »

Your picture shows the lower swivel mount half of a Neumann U47, 48, and (more rarely) M49 swivel mount.
The counter part that is missing is the actual connector housing with cable strain relief.

The  thread converter inserted in your swivel mount is used in modern mic stand applications, as the thread cut into the cylinder does not fit the modern mic stand standard.
Logged
Klaus Heyne
German Masterworks®
www.GermanMasterworks.com

Malotki

  • Newbie
  • *
  • Offline Offline
  • Posts: 17
  • Real Full Name: David Voyd
Re: Mic Stand/mount part ID Help Please
« Reply #2 on: March 07, 2013, 01:40:19 PM »

Cheers Klaus

I knew you would know. Trying to find a photo online of it in situ....
D
Logged
Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.029 seconds with 22 queries.