R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: query on split cable connections  (Read 4016 times)

bassconnekt

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Real Full Name: Bass Connekt
query on split cable connections
« on: April 28, 2012, 06:26:24 PM »

Hello all,

I'm new to the forum.  Just dropping by to ask a technical question about a cable connection that I need to fabricate for my setup.

I have a small mixer that I use to control the signal going to my studio monitors.  The main outputs go to the monitors, and there is one additional 1/4" stereo output that I would like to use to control two individual powered subs, a 12" and 15".

the cable connection I need to make it work would then be a single male 1/4" plug on one side, and two female 1/4" plugs on the other, one going to each of the two subs.  I will need two of these, one for the right and the left outputs.

I have made a few interconnects before with a single piece of cable, just soldering the plugs to each end, but how would I go about building such a splitter? Is it as simple as twisting the the two cables that go to the female ends together and attaching that to the male end?

Any advice would be greatly appreciated


Cheers~

Logged
Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.06 seconds with 18 queries.