Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jdg]

what i've found, is PU's readings aren't very constant -- and im not sure trust worthy.

i tested a disc with both PU and PT, and the PT one had the same reading everytime, and the PU one was different, sometimes drastically.

YMMV/FWIW/ZIPZAP/BOOMBAP

[John Moran]

well, cool.

when things get reassembled, i'll try the same test here and see what happens.

what burners were you using for the tests?

[jdg]

880SA and 716A

hopefully one day, masters on CDRs will be as rare as u-matic masters are today

[John Moran]

what, you don't miss your BVU and the chatter of a DTA printing out results that show you just wasted the last couple of hours due to one error at the 67 minute mark ? 

i'm gonna go stripe some tape just for old times' sake... 

[jdg]

luckily i wasn't old enough to make masters for that format, just run them in the dupe lab

[Matt_G]

I've only just noticed this thread now as I also haven't been on PSW in a while mainly for the same reasons. Usually too much work on. All the best Brad, you've run a tight ship. I was going to say DC would be a good replacement but he has his own forum now anyway..

No doubt we'll be in touch on other forums or on FB.