R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: A rare find...Plextor Premium  (Read 4233 times)

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: A rare find...Plextor Premium
« Reply #15 on: November 07, 2011, 05:19:02 pm »

what i've found, is PU's readings aren't very constant -- and im not sure trust worthy.

i tested a disc with both PU and PT, and the PT one had the same reading everytime, and the PU one was different, sometimes drastically.

YMMV/FWIW/ZIPZAP/BOOMBAP

:)
Logged
John McCaig
-the caption captain

John Moran

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
Re: A rare find...Plextor Premium
« Reply #16 on: November 07, 2011, 05:35:29 pm »

well, cool.

when things get reassembled, i'll try the same test here and see what happens.

what burners were you using for the tests?

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: A rare find...Plextor Premium
« Reply #17 on: November 07, 2011, 06:29:56 pm »

880SA and 716A

hopefully one day, masters on CDRs will be as rare as u-matic masters are today
Logged
John McCaig
-the caption captain

John Moran

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
Re: A rare find...Plextor Premium
« Reply #18 on: November 07, 2011, 06:39:49 pm »

what, you don't miss your BVU and the chatter of a DTA printing out results that show you just wasted the last couple of hours due to one error at the 67 minute mark ? 

i'm gonna go stripe some tape just for old times' sake...  :'(

jdg

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
Re: A rare find...Plextor Premium
« Reply #19 on: November 08, 2011, 04:50:29 pm »

luckily i wasn't old enough to make masters for that format, just run them in the dupe lab
Logged
John McCaig
-the caption captain

Matt_G

  • Newbie
  • *
  • Offline Offline
  • Posts: 39
  • Real Full Name: Matthew Gray
Re: A rare find...Plextor Premium
« Reply #20 on: November 09, 2011, 11:05:04 am »

I've only just noticed this thread now as I also haven't been on PSW in a while mainly for the same reasons. Usually too much work on. All the best Brad, you've run a tight ship. I was going to say DC would be a good replacement but he has his own forum now anyway..

No doubt we'll be in touch on other forums or on FB.

Logged

Pages: 1 [2]  All   Go Up