R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: ACM-900 Question....  (Read 5405 times)

Nizzle

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 427
ACM-900 Question....
« on: February 12, 2011, 02:18:55 PM »

Are there any Bulldog mods for this particular ribbon mic???

Logged

crazydoc

  • Full Member
  • ***
  • Offline Offline
  • Posts: 143
Re: ACM-900 Question....
« Reply #1 on: February 12, 2011, 03:50:37 PM »

The 900 has 2 transformers - one to couple the ribbon to the headamp, and another to couple the headamp to the output cable/preamp. It's conceivable that the Bulldog transformers could replace the first one, but whether it would change the sound for the better would be a crapshoot IMHO, without knowing the specs of the original transformer and/or a schematic of the mic.

Maybe Oliver will know.
Logged

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: ACM-900 Question....
« Reply #2 on: February 12, 2011, 05:32:52 PM »

There was (is) a plan to eventually come up with xfrmrs for the 900, but there are obviously so many, many things on the agenda(s) already, they must come later.
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.096 seconds with 17 queries.