R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: UREI 1176 Revision B Schematics  (Read 6709 times)

mjgreeneaudio

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 267
UREI 1176 Revision B Schematics
« on: January 03, 2011, 11:56:00 AM »

Hello,
Does anyone have an 1176 Rev B Schematic?  I have found Rev A and all the other versions but I haven't found a Rev B schematic.  I am going to be doing a Re-Cap and want to make sure I am looking at the right thing.  Also does anyone advise replacing the Fets?  Is there any reason to?  Do they drift or go out of spec or is it an either good or bad situation?

Thanks and any help is appreciated.

Michael Greene
Logged

zmix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2828
Re: UREI 1176 Revision B Schematics
« Reply #1 on: January 03, 2011, 12:06:58 PM »

mjgreeneaudio wrote on Mon, 03 January 2011 11:56

Hello,
Does anyone have an 1176 Rev B Schematic?  I have found Rev A and all the other versions but I haven't found a Rev B schematic.  I am going to be doing a Re-Cap and want to make sure I am looking at the right thing.  Also does anyone advise replacing the Fets?  Is there any reason to?  Do they drift or go out of spec or is it an either good or bad situation?

Thanks and any help is appreciated.

Michael Greene



The complete schematics are available on the web, do a search.  I have a rev B 1176, and I wouldn't advise changing anything except the caps, but first do some measurements to see if that's really necessary.

mjgreeneaudio

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 267
Re: UREI 1176 Revision B Schematics
« Reply #2 on: January 03, 2011, 04:32:38 PM »

Chuck,
Thank you.  I appreciate the advice.  I found those schematics but to my eyes it is the schematic for a Revision A.  I will look at them again.  

Thanks again,
Michael Greene
Logged

Nick Sevilla

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 853
Re: UREI 1176 Revision B Schematics
« Reply #3 on: January 03, 2011, 08:38:20 PM »

mjgreeneaudio wrote on Mon, 03 January 2011 08:56

Hello,
Does anyone have an 1176 Rev B Schematic?  I have found Rev A and all the other versions but I haven't found a Rev B schematic.  I am going to be doing a Re-Cap and want to make sure I am looking at the right thing.  Also does anyone advise replacing the Fets?  Is there any reason to?  Do they drift or go out of spec or is it an either good or bad situation?

Thanks and any help is appreciated.

Michael Greene



You can go to the Universal Audio website and get the 1176 Manual.
Their version of the manual has all of Bill's handwritten notes, plus schematics for every version made. Interesting reading in there.

http://www.uaudio.com/support/hardware/downloads.html

Enjoy.
Logged
-------------------------------------------------
It is quite possible, captain, that they find us grotesque and ugly and many people fear beings different from themselves.

www.nicksevilla.com

mjgreeneaudio

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 267
Re: UREI 1176 Revision B Schematics
« Reply #4 on: January 04, 2011, 03:02:21 PM »

Awesome.  
Thank you so much.

I appreciate all the help.
Michael Greene
Logged

zmix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2828
Re: UREI 1176 Revision B Schematics
« Reply #5 on: January 05, 2011, 01:00:03 AM »

mjgreeneaudio wrote on Mon, 03 January 2011 16:32

Chuck,
Thank you.  I appreciate the advice.  I found those schematics but to my eyes it is the schematic for a Revision A.  I will look at them again.  

Thanks again,
Michael Greene



.. do a search...  There used to be a complete set of schematics on the JBL site.

David Kulka

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 578
Re: UREI 1176 Revision B Schematics
« Reply #6 on: January 05, 2011, 10:25:54 PM »

I was never able to find a good clear Rev B schematic on the web, or anywhere else for that matter. The one on the JBL site is really hard to read.

Last year after a LOT of calling around it turned out that good old Sunset Sound in Hollywood had a clear original in their files, and they were kind enough to let me borrow and scan it. The original is quite large (about 11 x 25) so I took it to a blueprint place and had it scanned on an oversize machine.

I don't usually give out rare documentation but this one is important so what the heck, why not pay it forward. I do ask that no one posts this to any other web site. Anyway, here it is, and I hope it's helpful!

index.php/fa/16119/0/

Logged
http://www.studioelectronics.biz

Service & Restoration of UREI dbx Neve Eventide Marshall AMS Tube Gear and more

zmix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2828
Re: UREI 1176 Revision B Schematics
« Reply #7 on: January 06, 2011, 11:45:49 AM »

Whoa....!!  Thanks David!

mjgreeneaudio

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 267
Re: UREI 1176 Revision B Schematics
« Reply #8 on: January 06, 2011, 11:57:05 AM »

David,
Thank you so much.  That will help me get this done.  I really appreciate your willingness to post this.

Thank you again to everyone. I can't put my appreciation into words.

Michael Greene
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 19 queries.