R/E/P > Recording - Engineering & Production
How do you hook up FX pedals as outboard fx?
jetbase:
Using a console, what's the best way to connect guitar fx pedals to use as outboard fx in a mix, achieving the best s/n ratio & tone? I would think possibly you could simply connect an aux send directly to the pedal & keep the level low, fine tuning the level with the pedal's input level (if it has one). Or maybe, like reamping a guitar, use a passive DI in reverse (or a reamp box - but I don't have one). For returns I guess just DI into mic pre into fx returns or into mic input on a channel. Is there a better or simpler way?
Thanks,
Glenn
MagnetoSound:
That is exactly the way I would do it, although I wouldn't bother with the reverse DI in front of the pedal.
jetbase:
Thanks guys!
jonoaustin:
these things are fantastic: http://littlelabs.com/pcp.html
Actually, all his stuff is fantastic. You can occasionally find PCP's used...
jetbase:
Thanks Jono, it likes like a pretty handy little unit. Nice to know what's out there.
Navigation
[0] Message Index
[#] Next page
Go to full version