R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Baffle steup compensation  (Read 1804 times)

maxoche

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Baffle steup compensation
« on: September 20, 2010, 09:52:29 am »

Hello guys,

I am planning using my mid field monitors (jbl lsr32) mounted against the front wall of my studio, but not flush-mout. I am concerned about baffle stepup de-compensation (-6dB in the lower frequencies- shelf type) and would like to use a very minimal approach to it
I would tweak the values of this example, through measurements in the room of course.
do you think it would be valid?. monitoring signal eq is quite critical in my opinion, so some concerned advice would be top notch..
alternatively, I could also build a simple active lo shelf eq, such this :
http://www.linkwitzlab.com/images/graphics/shlv-hpf.gif

thanks

Maxime

index.php/fa/15448/0/
Logged

Thomas Jouanjean

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 342
Re: Baffle steup compensation
« Reply #1 on: September 20, 2010, 10:36:34 am »

The value you need will depend on the type of front wall you have. It could be of only 2-3dB.

I would measure first and see what is needed.

Logged
Thomas Jouanjean
Northward Acoustics - Engineering and Designs
http://www.northwardacoustics.com
http://www.facebook.com/pages/Northward-Acoustics/1062876633 71

Pro Audio Partners:
ATC Loudspeakers
FOCAL Professional Speakers

maxoche

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Baffle steup compensation
« Reply #2 on: September 20, 2010, 10:38:52 am »

Hello Thomas,
thanks for your reply,
I 'll measure first

best

Maxime
Logged
Pages: [1]   Go Up