R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: RE-20 Repair  (Read 48542 times)

Bill_Urick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1626
RE-20 Repair
« on: August 12, 2010, 09:53:34 PM »

I have a couple of old RE20's that need fixin' up.
Both were kind of rattling around, one had no output.
As I hoped, the one with no output just had a broken wire at the capsule.

The question is, what was used to suspend the inner workings of the mic within the body?

It's all pretty much dust now.

Thanks!
Logged
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

zebra50

  • Newbie
  • *
  • Offline Offline
  • Posts: 46
Re: RE-20 Repair
« Reply #1 on: August 13, 2010, 02:25:32 AM »

Hi Bill,

I'd give EV a call. The mics are still in production and the foam inserts should still be available.

Stewart
Logged
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

Bill_Urick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1626
Re: RE-20 Repair
« Reply #2 on: August 13, 2010, 07:35:02 AM »

Ok. So it's just foam.
Your suggestion is great.
Which explains why I didn't think of it.
Thank you!
Logged
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: RE-20 Repair
« Reply #3 on: August 13, 2010, 10:18:55 AM »

Request a price from EV before any work is carried out.

I recently 'sent away' a couple of time-degraded 20s merely requesting repairs, and they came back beautifully done...but the bill was much larger than I would have ever expected.

Know what you are getting into beforehand.
Logged

Matt Allen

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 250
Re: RE-20 Repair
« Reply #4 on: August 13, 2010, 11:22:29 AM »

The RE20 I had repaired by EV last year cost $200 plus shipping.
Logged
Matt "Buster" Allen
www.allen-sound.com

nob turner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 383
Re: RE-20 Repair
« Reply #5 on: August 13, 2010, 12:49:49 PM »

send it to marc at location sound corp. in north hollywood.  he just did one for me, cost about $80 with shipping.
Logged
Why do you think they call it the control room?
www.garymankin.com

Mike Cleaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 610
Re: RE-20 Repair
« Reply #6 on: August 13, 2010, 02:28:59 PM »

Sometimes EV (or whatever they're called today) will sell you the necessary foam to "do it yourself."
You want to make sure you carefully clean out all of the old foam residue before replacing it with the new stuff.
The hardest part is getting the mini allen wrench to open up the mic.
Some people I know also have made their own foam inserts.
Radio stations have dozens of these mics in use daily.
For some reason, the foam in some of them deteriorates rather quickly.
On the other hand, I've seen some 20 plus year old models where the foam is as good as new.
Logged
Mike Cleaver Broadcast Services
Vancouver, BC, Canada
Broadcast Studio Design and Consulting
Voiceover Talent
Newscaster

zebra50

  • Newbie
  • *
  • Offline Offline
  • Posts: 46
Re: RE-20 Repair
« Reply #7 on: August 13, 2010, 03:36:00 PM »

I was under the impression that the foam liner was available as a service part.
Logged
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

Fenris Wulf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 499
Re: RE-20 Repair
« Reply #8 on: August 14, 2010, 03:03:40 AM »

Mike Cleaver wrote on Fri, 13 August 2010 19:28


The hardest part is getting the mini allen wrench to open up the mic.

It's 0.035", which is roughly equal to 0.9 mm.
Logged
RESIST THE CYBERNETIC OVERLORDS
KDVS Studio A

Bill_Urick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1626
Re: RE-20 Repair
« Reply #9 on: August 14, 2010, 07:15:30 AM »

This is strictly DIY. Both mics disassembled already.

Fenris Wulf wrote on Sat, 14 August 2010 03:03


It's 0.035", which is roughly equal to 0.9 mm.


Found this info in a previous thread here which was very timely, thank-you!

Mike Cleaver wrote on Fri, 13 August 2010 19:28

 
The hardest part is getting the mini allen wrench to open up the mic.


Even knowing the size getting the wrench was not easy. Most normal tool sources (around here,anyway) don't carry them this small.


Logged
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

lucabasano

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: RE-20 Repair
« Reply #10 on: August 14, 2010, 04:39:47 PM »

  http://cid-993a80edf9120ac0.skydrive.live.com/browse.aspx/EV %20RE20%20-%20Filter%20Replacement?ct=photos

Hope it helps.
I've replaced foam to two Re20's no more than a couple months ago.
Just to mention,get in touch with your EV dealer(texim here in Italy),they've sent me parts in a week.
If U need,I can search and double check invoice,but from memory it's around Euro 40,00 for the three part(78233,78231).

Lucaindex.php/fa/15251/0/
Logged

lucabasano

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: RE-20 Repair
« Reply #11 on: August 14, 2010, 04:41:32 PM »

Sorry,I've forgotten parts list.

Lucaindex.php/fa/15252/0/
Logged

Bill_Urick

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1626
Re: RE-20 Repair
« Reply #12 on: August 14, 2010, 11:31:50 PM »

Beautiful!
Thanks, Luca.
Logged
Good sense is, of all things among men, the most equally distributed; for everyone thinks himself so abundantly provided with it, that those even who are the most difficult to satisfy in everything else, do not usually desire a larger measure of this quality than they already possess.

zebra50

  • Newbie
  • *
  • Offline Offline
  • Posts: 46
Re: RE-20 Repair
« Reply #13 on: August 15, 2010, 03:18:11 AM »

That's an awesome photo-tutorial. Thanks for sharing!
Logged
Stewart Tavener
Xaudia - studio, ribbon mic repairs
http://www.xaudia.co.uk

studiochap

  • Full Member
  • ***
  • Offline Offline
  • Posts: 177
Re: RE-20 Repair
« Reply #14 on: August 19, 2010, 09:09:02 AM »

Thanks Luca - this is really helpful!

Cheers,

Gwyn
Logged
Gwyn Mathias
Odessa Wharf Studios ( now down the tubes after 14yrs...RIP )
Pro Audio Survivor...Smile

"What,Me Worry?" Alfred E. Neumann (...or was it Newmann?Smile

Electrical Theory by Joseph Lucas (inventor of the Self-Dimming Headlamp):
"Smoke is the thing that makes electrical circuits work; we know this to be true because every time one lets the smoke out of the electrical system, it stops working"

Pages: [1] 2  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.07 seconds with 17 queries.