R/E/P > Brad Blackwood

What's with all the fuss about M/S?

<< < (3/12) > >>

dcollins:
compasspnt wrote on Tue, 27 April 2010 17:19
I might use M/S 1% of the time.



Ok, 5%.  Just to be trendy.


DC

masterhse:
I'm tied into a variable percentage rate.

bigaudioblowhard:
Jaakko, are you terminating the 111C's with 600 ohm resistors?

I read somewhere on the net where a guy was using a 3300 ohm resistor claiming less ringing?

bab

Viitalahde:
Mark, indeed I am. Or I think the tests were done with 680ohms, but they were still flat from 10hz to 20kHz with just some 0,2dB drooping at 20k. Gotta try out that 3300ohm resistor, but it does sound odd to me.

dcollins:
Viitalahde wrote on Tue, 27 April 2010 21:44
Mark, indeed I am. Or I think the tests were done with 680ohms, but they were still flat from 10hz to 20kHz with just some 0,2dB drooping at 20k. Gotta try out that 3300ohm resistor, but it does sound odd to me.


It would make more overshoot/ringing, not less.


DC

Navigation

[0] Message Index

[#] Next page

[*] Previous page