R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 [All]   Go Down

Author Topic: no pop filter, mix/edit technique  (Read 8638 times)

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
no pop filter, mix/edit technique
« on: January 31, 2010, 02:20:14 am »

I was reading the pop filter shootout thread at The Acid Test, and it got me thinking about times I've tried this technique, and some of the issues I've encountered.

First, I haven't been able to completely get away from (usually just a few) problematic plosives when I don't use a pop filter. I'm aware of 'the pencil' method, but can that possibly offer less coloration than nylon?

Later, when I'm comping vocals, sometimes I can edit around the plosives, maintaining the musicality of the vocal by using just that snippet of an alternate take. Other times, editing just that single syllable ruins the feel of the overall phrase.

After that I play with low shelf, applied just to that syllable or possibly word, and/or automation.

What tools/techniques are others using?
Logged

KB_S1

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 931
Re: no pop filter, mix/edit technique
« Reply #1 on: January 31, 2010, 06:32:38 am »

I usually use Digi's EQ3.

I have a preset saved: HPF at 160Hz
This is usually a good start.

The method I use is to process a full word, then trim back to near the pop and use a x-fade.
You have to process more than you want or you cannot fade.
Logged
<a href="http://www.parklanerecordingstudios.com/" class="link3">Park Lane Studio</a> Where to find me most of the time<br /><br />

<a href="http://www.flickr.com/photos/kb_s1/" class="link3">Flickr</a>where to see what I have been up to  <br /><br />

grantis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1407
Re: no pop filter, mix/edit technique
« Reply #2 on: January 31, 2010, 12:52:21 pm »

KB_S1 wrote on Sun, 31 January 2010 05:32

I usually use Digi's EQ3.

I have a preset saved: HPF at 160Hz
This is usually a good start.

The method I use is to process a full word, then trim back to near the pop and use a x-fade.
You have to process more than you want or you cannot fade.


160hz is really high.  Use a pop filter.
Logged
Grant Craig
Nuovo Music (Me)
Skiddco Music (Where I work)
Work History (Well, some of it anyway)

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: no pop filter, mix/edit technique
« Reply #3 on: January 31, 2010, 02:04:28 pm »

KB_S1 wrote on Sun, 31 January 2010 06:32

I usually use Digi's EQ3.

I have a preset saved: HPF at 160Hz
This is usually a good start.

The method I use is to process a full word, then trim back to near the pop and use a x-fade.
You have to process more than you want or you cannot fade.



Exactly the same, except I usually start about 90 and experiment upwards for best result on a word by word basis.

A pencil is sometimes partially helpful, and definitely not as destructive as the nylon (especially dual-layered nylon), or as the perforated metal.
Logged

jetbase

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2454
Re: no pop filter, mix/edit technique
« Reply #4 on: January 31, 2010, 05:32:42 pm »

I use the Wavelab DeClicker plugin's 'DePlop' function and process just the pops (in an Audio Montage). I have found this to be the most effective method, though sometimes I'll just use a HPF in an EQ plugin.
Logged
sleep is not an option

jwhynot: "There's a difference between thinking or acting dogmatically and drawing from experience."


Glenn Santry
http://www.myspace.com/glennsantry

KB_S1

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 931
Re: no pop filter, mix/edit technique
« Reply #5 on: January 31, 2010, 06:18:53 pm »

160Hz, who typed that then?

I meant 120, was still a bit gigged out this morning whilst trying to get to the studio!
I will qualify this, as it is still quite high, with the fact that it is rarely an issue at all so if there is pop it has been something unusual.

Interestingly some of my favourite songs from the last few years have pretty obvious pops on the vocal at some Point.
Logged
<a href="http://www.parklanerecordingstudios.com/" class="link3">Park Lane Studio</a> Where to find me most of the time<br /><br />

<a href="http://www.flickr.com/photos/kb_s1/" class="link3">Flickr</a>where to see what I have been up to  <br /><br />

maarvold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 853
Re: no pop filter, mix/edit technique
« Reply #6 on: January 31, 2010, 06:37:45 pm »

Waves Linear Phase EQ (Lowband Mono) in AudioSuite--I have a saved preset using the Low Shelf with the square corners in the graphic (V-Slope Low Shelf)--looks like a lightning bolt.  Settings are Gain -28.0, Freq 234, Q 0.90.  According to the screen curve, I'm down only around 4 dB at 130, but WAY down on the bottom.  I select the pop, plus 1 second either side (more or less) of it, process the file, then use Equal Gain fades to join the fix region to the original.  Almost always works like a charm.  
Logged
Michael Aarvold
Audio Engineer

j.hall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3787
Re: no pop filter, mix/edit technique
« Reply #7 on: February 01, 2010, 12:05:38 pm »

really?  you guys don't use a popper stopper at all?  

maybe it's the big rock i'm working on constantly, but the amount of compression applied to the vocal with tonal EQ'ing.  i can't say the popper stopper has ever bothered me.  in fact, i'm glad it's there.
Logged

Tim Dolbear

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: no pop filter, mix/edit technique
« Reply #8 on: February 01, 2010, 01:33:12 pm »

Use a popper stopper. End of story.

When I do get a mix in that was done with out, usually I have to go thru by hand and select the plosive by hand and EQ out JUST the plosive but using a Hipass set to 150-200hz.  

EQ out the whole track just to get fix the plosives is WAY more degrading than any pop filter would have been.
Logged
Tim Dolbear - Eclectica Studios Austin Texas

eclectica studios


"Just because you have a nice kitchen, don't mean you know how to cook"  TD

 

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: no pop filter, mix/edit technique
« Reply #9 on: February 01, 2010, 03:23:44 pm »

Here's something I posted somewhere here a couple of times before:

Think about the sound leaving a vocalists' mouth, and traveling towards the capsule. Ideally, what should be in between? The correct answer is nothing, if you are talking about good sound; just as in mixing (not possible usually) and Mastering (very possible; I've done it in my Mastering room) there should be nothing between the monitor speakers and the engineer's ears except for air (not a console, racks of gear, etc., etc.)

But we have practical applications to think about, not the least of which is the burst of air accompanying a "P" or other letters, or "swooshes" accompanying certain other sounds.

When the condenser microphone was first made, the plan was not for a singer to virtually "eat it" as he sang less than one inch from the capsule. The mics were designed for much more distant pickup of larger numbers of players/singers. So the design included in most cases a high boost in the frequency response, because that would give more balance from more distant sounds, and also included taking into account the physics of proximity effect, where closer instruments might have a somewhat fuller sound.

But what do we all do today, but get right up on the capsule grille cover, and bloody scream into the mic! So of course high sounds such as "S" are accentuated by the built-in freq rise. And of course the burst of air in a 'plosive is much closer, and accentuated by the naturally occurring proximity effect!

So what has been the normal solution? Why, yet one more thing (or 2, or 3...) in between (pop screen), and de-essers after the fact. Does anything seem askew with this photograph? Once again, humans are treating the symptoms, and not the causes.

Of course, the causes are not that easy to treat. The singer would have to move back, and few think they can do that (no pacifier), pops have to be removed (fairly easy now, but still not perfect) or a different type of mic must be used (ribbon? 58/S1-type? Omni?).

Anyway, getting back to that sound traveling towards the capsule, the use of the pop screen in between causes the sound waves to deflect, possibly hitting all sorts of things, and perhaps even bouncing around within the dual layers of the screen, or the grille (already grilles can be bad enough on some mics), or the stand(s), etc. The different parts of the frequency spectrum may well encounter comb filtering, causing the cancellation of certain freq's, or the potential buildup of others, and at best, may arrive at very slightly "wrong" times to the actual capsule front. None of this is very appealing if you want your sound to be "perfect," let alone "good."

The problem is exacerbated by the singer's movements. As we all know, singers will, and probably need to, move around. The cancellations may be quite different given differing positions from whence the sound has emanated.

I recently did extensive (although NOT scientific) testing of this effect, and found that, by looking at many different "sibilant" sounds on a frequency analyser, that no two were exactly the same. Often however, there was not just a rise in the high freq, but TWO rises, with a steep valley in between. The average hi-freq rise (the sibilance) might be about 5-6 dB, but the VALLEY might be as much as 12 dB! This meant that, even though the sound-not-liked was "sibilant," at least a tiny part of that disagreeable sound was caused by MISSING high frequencies, not extended ones! If using a normal de-esser, the "bad sound of the sibilant syllable" would not disappear, only get quieter. I discovered that by applying a corrective EQ, namely approx +6 to +9 of the missing freq range, at a very low bandwidth, centered on the valley's lowest point, made the formerly "sibilant" sound actually better, because, although it was still louder than normal, it was at least MORE NATURAL!

Then, and only then, and if desired, by applying a de-esser the entire sibilant sound could return much closer to normalcy.

But all of this is AFTER THE FACT TREATMENT. Prevention is a much better cure!

So the ONLY pop filters I will use now are the foam ones (as supplied with a new U-87 and some other mics). But these are subject to eventual degradation (Klaus has a Sticky about testing the foam). And this is something you may not want to use one a vocalist that "showers" the area in front of him (another story for another time). Also some complain about theoretical high frequency loss. Perhaps there is some, but I much prefer that to horrible comb filtering and massive treatment later! Also, a slight loss in broadband high frequencies is somewhat preferable to me in some cases, as it counteracts to a degree the high boost built into the mic for more distant usage...for that distant usage, where you need the boost, of course you wouldn't be using any filter anyway!

Logged

DarinK

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 410
Re: no pop filter, mix/edit technique
« Reply #10 on: February 01, 2010, 04:43:27 pm »

Tim Dolbear wrote on Mon, 01 February 2010 10:33

 

EQ out the whole track just to get fix the plosives is WAY more degrading than any pop filter would have been.


No one has suggested EQing the entire track - all the above posts are about just EQing the plosive, as you recommend.

For everyone's benefit, here is a link to the thread to which the original poster referred:
http://recforums.prosoundweb.com/index.php/t/27207/11988/

Note that the test is just one person's voice from a stationary position, so some of what Terry mentions above would not be audible.
Logged

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: no pop filter, mix/edit technique
« Reply #11 on: February 01, 2010, 04:59:32 pm »

Any sibilance effect is of course exacerbated by loud "forced" singing, compression, etc.
Logged

rankus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5560
Re: no pop filter, mix/edit technique
« Reply #12 on: February 01, 2010, 10:01:45 pm »



As jetbase mentioned above, Steinberg products ship with a "Deplopper" pluggin that actually works quite well.

I imagine one could create a chain similar to de-essing with a side chained comp and EQ ... think de-esser but keyed for lower end.

Logged
Rick Welin - Clark Drive Studios http://www.myspace.com/clarkdrivestudios

Ive done stuff I'm not proud of.. and the stuff I am proud of is disgusting ~ Moe Sizlack

"There is no crisis in energy, the crisis is in imagination" ~ Buckminster Fuller

grantis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1407
Re: no pop filter, mix/edit technique
« Reply #13 on: February 01, 2010, 10:07:17 pm »

compasspnt wrote on Mon, 01 February 2010 14:23

Here's something I posted somewhere here a couple of times before:

Think about the sound leaving a vocalists' mouth, and traveling towards the capsule. Ideally, what should be in between? The correct answer is nothing, if you are talking about good sound; just as in mixing (not possible usually) and Mastering (very possible; I've done it in my Mastering room) there should be nothing between the monitor speakers and the engineer's ears except for air (not a console, racks of gear, etc., etc.)

But we have practical applications to think about, not the least of which is the burst of air accompanying a "P" or other letters, or "swooshes" accompanying certain other sounds.

When the condenser microphone was first made, the plan was not for a singer to virtually "eat it" as he sang less than one inch from the capsule. The mics were designed for much more distant pickup of larger numbers of players/singers. So the design included in most cases a high boost in the frequency response, because that would give more balance from more distant sounds, and also included taking into account the physics of proximity effect, where closer instruments might have a somewhat fuller sound.

But what do we all do today, but get right up on the capsule grille cover, and bloody scream into the mic! So of course high sounds such as "S" are accentuated by the built-in freq rise. And of course the burst of air in a 'plosive is much closer, and accentuated by the naturally occurring proximity effect!

So what has been the normal solution? Why, yet one more thing (or 2, or 3...) in between (pop screen), and de-essers after the fact. Does anything seem askew with this photograph? Once again, humans are treating the symptoms, and not the causes.

Of course, the causes are not that easy to treat. The singer would have to move back, and few think they can do that (no pacifier), pops have to be removed (fairly easy now, but still not perfect) or a different type of mic must be used (ribbon? 58/S1-type? Omni?).

Anyway, getting back to that sound traveling towards the capsule, the use of the pop screen in between causes the sound waves to deflect, possibly hitting all sorts of things, and perhaps even bouncing around within the dual layers of the screen, or the grille (already grilles can be bad enough on some mics), or the stand(s), etc. The different parts of the frequency spectrum may well encounter comb filtering, causing the cancellation of certain freq's, or the potential buildup of others, and at best, may arrive at very slightly "wrong" times to the actual capsule front. None of this is very appealing if you want your sound to be "perfect," let alone "good."

The problem is exacerbated by the singer's movements. As we all know, singers will, and probably need to, move around. The cancellations may be quite different given differing positions from whence the sound has emanated.

I recently did extensive (although NOT scientific) testing of this effect, and found that, by looking at many different "sibilant" sounds on a frequency analyser, that no two were exactly the same. Often however, there was not just a rise in the high freq, but TWO rises, with a steep valley in between. The average hi-freq rise (the sibilance) might be about 5-6 dB, but the VALLEY might be as much as 12 dB! This meant that, even though the sound-not-liked was "sibilant," at least a tiny part of that disagreeable sound was caused by MISSING high frequencies, not extended ones! If using a normal de-esser, the "bad sound of the sibilant syllable" would not disappear, only get quieter. I discovered that by applying a corrective EQ, namely approx +6 to +9 of the missing freq range, at a very low bandwidth, centered on the valley's lowest point, made the formerly "sibilant" sound actually better, because, although it was still louder than normal, it was at least MORE NATURAL!

Then, and only then, and if desired, by applying a de-esser the entire sibilant sound could return much closer to normalcy.

But all of this is AFTER THE FACT TREATMENT. Prevention is a much better cure!

So the ONLY pop filters I will use now are the foam ones (as supplied with a new U-87 and some other mics). But these are subject to eventual degradation (Klaus has a Sticky about testing the foam). And this is something you may not want to use one a vocalist that "showers" the area in front of him (another story for another time). Also some complain about theoretical high frequency loss. Perhaps there is some, but I much prefer that to horrible comb filtering and massive treatment later! Also, a slight loss in broadband high frequencies is somewhat preferable to me in some cases, as it counteracts to a degree the high boost built into the mic for more distant usage...for that distant usage, where you need the boost, of course you wouldn't be using any filter anyway!





OK...so...if every condenser mic made isn't designed for the way vocals are tracked by almost everybody these days...would that not qualify as a design flaw by EVERY manufacturer?


Logged
Grant Craig
Nuovo Music (Me)
Skiddco Music (Where I work)
Work History (Well, some of it anyway)

compasspnt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16266
Re: no pop filter, mix/edit technique
« Reply #14 on: February 02, 2010, 12:57:38 am »

No.

There is a difference between a design being originally intended for one purpose, and that design being found over time to be pleasing to people when used in (yet) another way.

There is no law that says how any microphone must be used.

Manufacturers today are well aware of how people will probably use their microphones, and also are aware of what the design actually is ad does.

That cannot be considered "a flaw."

Microphones is what they is.

You might find something pleasing if you can get a singer to back up a bit, and then you increase your gain a little.

Or not.
Logged

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
Re: no pop filter, mix/edit technique
« Reply #15 on: February 02, 2010, 01:12:26 am »

j.hall wrote on Mon, 01 February 2010 09:05

really?  you guys don't use a popper stopper at all?  

maybe it's the big rock i'm working on constantly, but the amount of compression applied to the vocal with tonal EQ'ing.  i can't say the popper stopper has ever bothered me.  in fact, i'm glad it's there.


I've seen colleagues use two popper stoppers and a pencil, and the track came out great. But could it have been a little better?

That's the question I take away from every session, despite the fact that I've actually made some recordings that I'm proud of. I suspect most of us are this way.

You have to figure out what works for you, and to me, that story never ends.

PS, Maarvold, I didn't mean to jack your thread idea. I just re-read your bump over there and realized that you really deserve the credit for starting this conversation-- thank you!
Logged

Podgorny

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1491
Re: no pop filter, mix/edit technique
« Reply #16 on: February 02, 2010, 01:30:18 am »

I find the hexagonal shape of the pencil to cause undesirable artifacts.  Bic pens are much preferred.
Logged
"Nobody cares what the impedance is; all they care about is when you can walk into the room, set up a mic, turn the knobs, hit record, and make everybody go 'wow.'"

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
Re: no pop filter, mix/edit technique
« Reply #17 on: February 02, 2010, 01:54:49 am »

Podgorny wrote on Mon, 01 February 2010 22:30

I find the hexagonal shape of the pencil to cause undesirable artifacts.  Bic pens are much preferred.


Sharpie's sound phat and you can tag with them.
Logged

Reno

  • Newbie
  • *
  • Offline Offline
  • Posts: 38
Re: no pop filter, mix/edit technique
« Reply #18 on: February 02, 2010, 10:16:04 am »

hi guys!

try Spectro !

http://www.stillwellaudio.com/?page_id=32http://www.stillwellaudio.com/?page_id=32

a low cost plug-ins that change my life

denoiser, deplopper, debreath, eq, analyser,...
it's a all in one, easy (as hell) to use plug-in and it's awesome
Logged

grantis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1407
Re: no pop filter, mix/edit technique
« Reply #19 on: February 02, 2010, 11:45:59 am »

Podgorny wrote on Tue, 02 February 2010 00:30

I find the hexagonal shape of the pencil to cause undesirable artifacts.  Bic pens are much preferred.


Mont Blanc pens have a nice high-end quality.  Bic is the behringer of pop filters.
Logged
Grant Craig
Nuovo Music (Me)
Skiddco Music (Where I work)
Work History (Well, some of it anyway)

jetbase

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2454
Re: no pop filter, mix/edit technique
« Reply #20 on: February 02, 2010, 05:02:17 pm »

grantis wrote on Wed, 03 February 2010 03:45

Podgorny wrote on Tue, 02 February 2010 00:30

I find the hexagonal shape of the pencil to cause undesirable artifacts.  Bic pens are much preferred.


Mont Blanc pens have a nice high-end quality.  Bic is the behringer of pop filters.


Be careful what road you go down because once you get to a quill you're back to popper stopper again.
Logged
sleep is not an option

jwhynot: "There's a difference between thinking or acting dogmatically and drawing from experience."


Glenn Santry
http://www.myspace.com/glennsantry

grantis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1407
Re: no pop filter, mix/edit technique
« Reply #21 on: February 02, 2010, 10:00:46 pm »

jetbase wrote on Tue, 02 February 2010 16:02

grantis wrote on Wed, 03 February 2010 03:45

Podgorny wrote on Tue, 02 February 2010 00:30

I find the hexagonal shape of the pencil to cause undesirable artifacts.  Bic pens are much preferred.


Mont Blanc pens have a nice high-end quality.  Bic is the behringer of pop filters.


Be careful what road you go down because once you get to a quill you're back to popper stopper again.



yeah, no doubt.  I hate those things though.  Always leaving ink stains on my chin.
Logged
Grant Craig
Nuovo Music (Me)
Skiddco Music (Where I work)
Work History (Well, some of it anyway)

j.hall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3787
Re: no pop filter, mix/edit technique
« Reply #22 on: February 03, 2010, 11:31:10 am »

they tickle my face...
Logged

jonathan jetter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 443
Re: no pop filter, mix/edit technique
« Reply #23 on: February 03, 2010, 01:01:27 pm »

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.
Logged

maarvold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 853
Re: no pop filter, mix/edit technique
« Reply #24 on: February 04, 2010, 02:00:58 am »

jonathan jetter wrote on Wed, 03 February 2010 10:01

i have recently stopped using a pop-filter for most sessions...

...the other night i did a vocal session with no pop filter and the mic sounded like a million bucks...


This mirrors how I feel about results I've been getting recently when doing vocals with no pop filter.  
Logged
Michael Aarvold
Audio Engineer

Tomas Danko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4733
Re: no pop filter, mix/edit technique
« Reply #25 on: February 04, 2010, 07:44:28 am »

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...
Logged
http://www.danko.se/site-design/dankologo4s.gif
"T(Z)= (n1+n2*Z^-1+n2*Z^-2)/(1+d1*z^-1+d2*z^-2)" - Mr. Dan Lavry
"Shaw baa laa raaw, sidle' yaa doot in dee splaa" . Mr Shooby Taylor

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
Re: no pop filter, mix/edit technique
« Reply #26 on: February 04, 2010, 07:59:52 am »

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.
Logged

iCombs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 537
Re: no pop filter, mix/edit technique
« Reply #27 on: February 04, 2010, 04:50:48 pm »

NelsonL wrote on Thu, 04 February 2010 06:59

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.


Sharp end out...helps to really teach the lesson.
Logged
Ian Combs
Producer/Engineer
Lightspeed Group, Inc.
----------------------
"Mista apareeatah... can I have maar beass at all frequencies?"

DCombs

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: no pop filter, mix/edit technique
« Reply #28 on: February 07, 2010, 01:56:46 am »

iCombs wrote on Thu, 04 February 2010 15:50

NelsonL wrote on Thu, 04 February 2010 06:59

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.


Sharp end out...helps to really teach the lesson.


i'm with icombs, maybe educating people about how to sing into a mic is good. i always sing slightly off axis, no filter; no pop. just don't be retarded and focus on what really matters, a performance. i think that should be a moto.
Logged
I'm a certified pants technician.

Jonah A. Kort

  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
Re: no pop filter, mix/edit technique
« Reply #29 on: February 07, 2010, 07:58:29 am »

DCombs wrote on Sun, 07 February 2010 00:56

just don't be retarded and focus on what really matters, a performance.



Quoted for emphasis...

Logged

Tomas Danko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4733
Re: no pop filter, mix/edit technique
« Reply #30 on: February 07, 2010, 08:55:19 am »

DCombs wrote on Sun, 07 February 2010 06:56

iCombs wrote on Thu, 04 February 2010 15:50

NelsonL wrote on Thu, 04 February 2010 06:59

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.


Sharp end out...helps to really teach the lesson.


i'm with icombs, maybe educating people about how to sing into a mic is good. i always sing slightly off axis, no filter; no pop. just don't be retarded and focus on what really matters, a performance. i think that should be a moto.



When it comes to inexperienced actors (not vocalists), sometimes you can tell them not to change their distance and angle to the microphone and it will be forgotten everytime they act. It's hilarious, but also a problem. A taped cross on the floor and a pop filter can help the situation a bit.
Logged
http://www.danko.se/site-design/dankologo4s.gif
"T(Z)= (n1+n2*Z^-1+n2*Z^-2)/(1+d1*z^-1+d2*z^-2)" - Mr. Dan Lavry
"Shaw baa laa raaw, sidle' yaa doot in dee splaa" . Mr Shooby Taylor

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
Re: no pop filter, mix/edit technique
« Reply #31 on: February 08, 2010, 05:47:26 am »

I've had 'punk rock' vocalists hold a stunt 58 while recording them with an LDC.
Logged

DCombs

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: no pop filter, mix/edit technique
« Reply #32 on: February 08, 2010, 07:18:57 pm »

Tomas Danko wrote on Sun, 07 February 2010 07:55

DCombs wrote on Sun, 07 February 2010 06:56

iCombs wrote on Thu, 04 February 2010 15:50

NelsonL wrote on Thu, 04 February 2010 06:59

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.


Sharp end out...helps to really teach the lesson.


i'm with icombs, maybe educating people about how to sing into a mic is good. i always sing slightly off axis, no filter; no pop. just don't be retarded and focus on what really matters, a performance. i think that should be a moto.



When it comes to inexperienced actors (not vocalists), sometimes you can tell them not to change their distance and angle to the microphone and it will be forgotten everytime they act. It's hilarious, but also a problem. A taped cross on the floor and a pop filter can help the situation a bit.



indeed! i also think that if a plosive "ruined" your performance, that something else might be wrong with it.

would you rather hear a great performance with a pop, or hear a mediocre performance with no pops?
Logged
I'm a certified pants technician.

NelsonL

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1233
Re: no pop filter, mix/edit technique
« Reply #33 on: February 09, 2010, 12:49:09 am »

My Pop used to take me to concerts all the time...
Logged

Tomas Danko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4733
Re: no pop filter, mix/edit technique
« Reply #34 on: February 09, 2010, 07:03:52 am »

DCombs wrote on Tue, 09 February 2010 00:18

Tomas Danko wrote on Sun, 07 February 2010 07:55

DCombs wrote on Sun, 07 February 2010 06:56

iCombs wrote on Thu, 04 February 2010 15:50

NelsonL wrote on Thu, 04 February 2010 06:59

Tomas Danko wrote on Thu, 04 February 2010 04:44

jonathan jetter wrote on Wed, 03 February 2010 18:01

i have recently stopped using a pop-filter for most sessions.

i think for hip-hop, or loud rock, the benefits may still outweigh the drawbacks.

but i was about to throw down several thousand for a different vocal mic after growing displeased with my Mojave MA-200.

the other night i did a vocal session with no pop filter and the mic sounded like a million bucks.  easily the best vocal sound i've recorded in a long, long time.  i've done other sessions with the same singer through the same chain (API 312, Purple MC77, Digi 192) that didn't sound nearly as big/full/warm/awesome/natural/whatever.  totally happy with the mic now.


Sometimes it's useful to have a pop filter in order to prevent a nervous and inexperienced talent/actor from moving too close to the microphone...


Or, just arrange the pencil horizontally.


Sharp end out...helps to really teach the lesson.


i'm with icombs, maybe educating people about how to sing into a mic is good. i always sing slightly off axis, no filter; no pop. just don't be retarded and focus on what really matters, a performance. i think that should be a moto.



When it comes to inexperienced actors (not vocalists), sometimes you can tell them not to change their distance and angle to the microphone and it will be forgotten everytime they act. It's hilarious, but also a problem. A taped cross on the floor and a pop filter can help the situation a bit.



indeed! i also think that if a plosive "ruined" your performance, that something else might be wrong with it.

would you rather hear a great performance with a pop, or hear a mediocre performance with no pops?



Indeed, indeed! I have no problems with plosives, they're easy to fix in post.

My example above has little to do with avoiding plosives, and all to do with preventing the actor to eat the microphone and get bass build up due to proximity.
Logged
http://www.danko.se/site-design/dankologo4s.gif
"T(Z)= (n1+n2*Z^-1+n2*Z^-2)/(1+d1*z^-1+d2*z^-2)" - Mr. Dan Lavry
"Shaw baa laa raaw, sidle' yaa doot in dee splaa" . Mr Shooby Taylor

DCombs

  • Newbie
  • *
  • Offline Offline
  • Posts: 31
Re: no pop filter, mix/edit technique
« Reply #35 on: February 10, 2010, 09:10:36 pm »

with a ldc, have you tried slightly above the singer's mouth about 6 inches away angled down into the singers mouth? that way airflow never enters into it, unless they sing at it!
Logged
I'm a certified pants technician.

j.hall

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3787
Re: no pop filter, mix/edit technique
« Reply #36 on: February 11, 2010, 10:21:02 am »

i've turned the mic itself 45 degrees off axis from the singer.  kinda the same thing you describe.  works well, but in some situation can yield and "thin" sound.
Logged

iCombs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 537
Re: no pop filter, mix/edit technique
« Reply #37 on: February 11, 2010, 05:02:49 pm »

Basically...any means of getting the microphone out of line of a direct blast of air while still pointing it and your singer's mouth...good place to start.

I personally prefer up over the mouth (so that the bottom of the mic is about at their eyebrows with a hanging LDC) and pointing down...it feels like you get a little more chest resonance from that sort of position (because it's pointing more in the general direction of the chest) than if you were to point it in from a side...just my experience.
Logged
Ian Combs
Producer/Engineer
Lightspeed Group, Inc.
----------------------
"Mista apareeatah... can I have maar beass at all frequencies?"

Ian Visible

  • Full Member
  • ***
  • Offline Offline
  • Posts: 179
Re: no pop filter, mix/edit technique
« Reply #38 on: February 12, 2010, 11:20:32 am »

I like it up and over with no shielding also, but from one or two feet away.

Sounds natural to me.

DarinK

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 410
Re: no pop filter, mix/edit technique
« Reply #39 on: February 12, 2010, 12:28:55 pm »

The main problem with up & over & close is that the vocals can sound nasally, like the vocalist has their nose plugged.
A foot or two away straight out front works best for me, IF I can keep the vocalist at that distance.
Maybe I should construct a fake pop-filter, of material so porous that it will be useless for pops but will also have minimal effect on the sound, then just use that to "place" the vocalist.  Or maybe just an empty hoop to sing through. Smile
(I've tried the "dummy mic" but having a 58 directly in front of the mouth can make things sound muffled.)
Logged

grantis

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1407
Re: no pop filter, mix/edit technique
« Reply #40 on: February 15, 2010, 10:18:15 pm »

Ian Visible wrote on Fri, 12 February 2010 10:20

I like it up and over with no shielding also, but from one or two feet away.

Sounds natural to me.



I agree that this can work...but as hard as I crush lead vocals, the room has to be DEAD in order to pull it off.

Logged
Grant Craig
Nuovo Music (Me)
Skiddco Music (Where I work)
Work History (Well, some of it anyway)

Ian Visible

  • Full Member
  • ***
  • Offline Offline
  • Posts: 179
Re: no pop filter, mix/edit technique
« Reply #41 on: February 16, 2010, 09:46:13 am »

That's a fair point.

I tend not to compress heavily so it's not such an issue for me.

Josh McArdle

  • Newbie
  • *
  • Offline Offline
  • Posts: 42
Re: no pop filter, mix/edit technique
« Reply #42 on: February 17, 2010, 02:01:16 am »

I used an R122 on backing vocals the other day and got some PUHretty awful PUHlosives from about a foot away, even with a pop shield. Ended up with the top of the ribbon at chin height about a foot and a half away and tilted just off axis.

I like it there sometimes, aimed at the throat. My lead guitarist has quite a nasal voice, so that sort of position, with a little cut at 1k helps to balance it up. A bit irrelevant but since we're discussing puhsitioning... Very Happy



Logged

Fenris Wulf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 499
Re: no pop filter, mix/edit technique
« Reply #43 on: February 23, 2010, 07:48:22 am »

I put up an SM57 as a dummy mic, tell the singer to aim at the SM57, and I put the real mic next to it at an angle of about 20 degrees, pointed at the singer's mouth. It's as close as possible without being hit by the airflow.
Logged
RESIST THE CYBERNETIC OVERLORDS
KDVS Studio A
Pages: 1 2 3 [All]   Go Up