Constantin wrote on Wed, 11 November 2009 03:24 |
Hey
Looks like a cool Project. Are all the Slats calculated, at the specific location?.
I´m sure the room will sound great when finished. But for my personal optical likes,there is a litle too much wood.
Best wishes for your Studio cheers constantin
|
She's been a real beast to pull out of the ground... oof!
Yes, the slats are meticulously set at specific widths... I have a tolerance of no more than 1/4" across an entire wall face.
All the rooms have seriously good acoustic properties.
The RT-60's and freq responses haven't been measured at this point, but everyone who's been in the shop has been impressed with how well the rooms sound.
The RT-60 of the tracking room is somewhere between 250 and less than 500mS. The control room is well under 100mS. The hallway is a tad longer than 500mS and the bathroom is a bit over 1500mS. (Can you say chamber?
)
The only room I'm really concerned with is the iso booth. I just hope I've got enough bass trapping to keep the bass somewhat in check.
The sweet spot in the control room is about 3 feet deep and almost 4 feet wide. Of course that will change a bit when we get the console desk and the producer's desk in there, but I don't see any reason that it should get any smaller, unless I move the monitors towards the center of the room.