R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: tetrahedron's custom work / questions  (Read 1472 times)

tetrahedron

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
tetrahedron's custom work / questions
« on: May 26, 2009, 01:05:13 PM »

Hello bblackwood. Thank you.

 Ok, I'm finally ready to start posting some questions.  My name is Rick, and I have a ton of questions.  But before I do, I need to run a series of tests to support my questions. Basically here is why.  By virtue of the fact that I am a pro detailer(fancy name for building on paper/computer Razz ) I am prone to draw everything at the detail level. That is to say, I leave nothing for granted when designing or drawing. My studio is no exception  However, since a lot of stuff I draw is detail oriented, in order for for some detail to show up correctly, I need to actually see how it is displayed on the forum. Same with pics. This has to do with pixel resolution and size.
 But there were some things I didn't find regarding posting attatchments. So, I've compressed everything(via CorelPSP) to under 67kb and the width resolution to what Steve said..ie  750 pixels max. Anyway, no time to start asking questions right now. BTW, some questions may be in other forums, like acoustics and construction..but the attatchment questions relate nonetheless.

So...on with the tests. Very Happy btw, these are all in the same size format. I'll post one or two later that are OVERSIZE just to see the difference as I MAY have to occasionally do that because of detail resolution.
oh, one other thing. All my images are stored on a hosting site which I link through the "img" icon above. I hardly ever directly upload from my computer.
fitZ
http://httpics.com//is.php?i=491&img=1_Drum_Iso_Basi.jpg
http://httpics.com//is.php?i=370&img=1317Final_componene.jpg
http://httpics.com//is.php?i=371&img=4995Final_componene.jpg
http://httpics.com//is.php?i=369&img=Final_componene.jpg
http://httpics.com//is.php?i=364&img=5212Tape_Machine_Fi.jpg
http://httpics.com//is.php?i=352&img=8496LCD3_Cleanup_wi.jpg
http://httpics.com//is.php?i=492&img=4_Control_Room_.jpg
http://httpics.com//is.php?i=493&img=5_Control_Room_.jpg
got a few more, but ten is the limit for this post.
fitZ
Logged
Alright, breaks over, back on your head..

tetrahedron

  • Newbie
  • *
  • Offline Offline
  • Posts: 22
Re: The DIY thread
« Reply #1 on: May 26, 2009, 01:07:32 PM »

Ok, heres some pics so I can see the resolution.

http://httpics.com//is.php?i=494&img=722Monitor_Build_w.jpg
http://httpics.com//is.php?i=286&img=studio5.JPG
http://httpics.com//is.php?i=321&img=C9.jpg

here is a pic with real detail(DIY console bridge interlock)
http://httpics.com//is.php?i=318&img=morebracket27.J.jpg

and this(DIY console wristpad/endcap interface)
http://httpics.com//is.php?i=316&img=studio6.JPG

Well, that oughta do it for now. :mrgreen:  Rolling Eyes  Wink  Ok, time to see how they come out
Logged
Alright, breaks over, back on your head..

franman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 580
Re: The DIY thread
« Reply #2 on: June 18, 2009, 10:08:23 PM »

Rick,

When you actually get to the question part of your post, can you make a new thread out in the main Acoustic In Motion area please? This is a sticky thread that Thomas started for specific examples of DIY projects....

If you need to post a "test" post to look at your images, than that's ok.. I'll loose it later...

Just trying to keep things in the right places where folks will see them and actually reply. Thanks!!

FM
Logged
Francis Manzella - President, FM Design Ltd.
                 - Managing Director, Griffin Audio
fmdesign.com
griffinaudiousa.com

bblackwood

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7036
Re: tetrahedron's custom work / questions
« Reply #3 on: June 18, 2009, 10:23:12 PM »

I went ahead and split this off to elicit more responses - let me know if this poses a problem.
Logged
Brad Blackwood
euphonic masters

franman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 580
Re: tetrahedron's custom work / questions
« Reply #4 on: June 18, 2009, 10:47:34 PM »

Thanks Brad..
Logged
Francis Manzella - President, FM Design Ltd.
                 - Managing Director, Griffin Audio
fmdesign.com
griffinaudiousa.com

Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.07 seconds with 20 queries.