R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Hairball Audio  (Read 11168 times)

philipp

  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
Hairball Audio
« on: December 22, 2010, 08:49:27 AM »

Has somebody made a unit or worked with it?
Might this be worth a try? It seems reasonably priced if it does what it says.

http://hairballaudio.com/


Thank you,

Philipp

kats

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1694
Re: Hairball Audio
« Reply #1 on: December 22, 2010, 09:10:10 AM »

Yes, I've built a pair of their Rev A's and they sound great. They sound slightly more aggressive than UA Rev D's in that you  can hear a slight touch of distortion in the top end. As far as noise floor, I can't hear the difference,  but  someone had measured it and the specs were pretty close.

Logged
Tony K.
http://empirerecording.ca

Entertainment is a bore, communication is where it's at! - Brian Jones 1967

philipp

  • Full Member
  • ***
  • Offline Offline
  • Posts: 152
Re: Hairball Audio
« Reply #2 on: December 22, 2010, 10:45:17 AM »

I think I'll go for a pair of them. Do you know, how much you've spent on the other parts? How long did it take to solder one?

kats

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1694
Re: Hairball Audio
« Reply #3 on: December 22, 2010, 02:22:42 PM »

Oh I don't know, maybe another $50 plus the $60 for the PCB.
Logged
Tony K.
http://empirerecording.ca

Entertainment is a bore, communication is where it's at! - Brian Jones 1967

Greg Dixon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 791
Re: Hairball Audio
« Reply #4 on: December 22, 2010, 07:41:04 PM »

I've built a pair of the Rev D and a Rev A. Both sound great. The cases look good and they transformers are inexpensive and sound really good. I'd previously built 4 of the Rev F (I think). I like the A and D slightly more.
Logged
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.049 seconds with 21 queries.