Absolutely stunning work on the build and asthetics. It reminds me a bit of an early BC Rich when they were hand built and also of the Alembic.
One thing i did notice the ends of the frets seem to be at aprox 90% to the fretboard top. When i was at Maton we used to run a fine flat bastard file along the frett ends after cutting, till they were flush with the end of the fretboard, then we would angle the file a bit less than 45% and file the fret ends till the file also puts an angle on the fretboard edge. Then round the bottom edge of that angle off so it fits into the contour of the neck.