R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: AKG 414 EB wanna be.....  (Read 6653 times)

bigbone

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1297
AKG 414 EB wanna be.....
« on: June 16, 2008, 02:39:25 PM »


I did try a pair of AKG 414 EB with the teflon capsule as OH'S and love it,
is there a microphone who's got the same or close tone as the AKG,
It's not obvious to find one of these mic , so that's why i ask
is it possible  !!!!!!!!!!!!

Thank you
Logged

brett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1114
Re: AKG 414 EB wanna be.....
« Reply #1 on: June 16, 2008, 10:46:01 PM »

the C-12(brass ring) are hard to find and are pricey. If you shopped around some vintage dealers you could track down a pair of non C-12 EB's for a reasobable price I am sure.

but to answer your question...sputniks maybe? Give them a listen. Also for overheads try a pair of chemeleon labs TS1's. They are very cheap and sound amazing.    
Logged

maarvold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 853
Re: AKG 414 EB wanna be.....
« Reply #2 on: June 18, 2008, 01:21:37 AM »

My Sputniks 'remind' me of my 414EB/brass CK12--in a certain way more than my friend's 414TLII does.  YMMV.  
Logged
Michael Aarvold
Audio Engineer

seedyunderbelly.com

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2465
Re: AKG 414 EB wanna be.....
« Reply #3 on: July 17, 2008, 01:07:38 AM »

Didn't he say Teflon not Brass?

They are not so hard to find.
j

Barry Hufker

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8228
Re: AKG 414 EB wanna be.....
« Reply #4 on: July 17, 2008, 02:17:18 AM »

Yes, the reference was to the white plastic (nylon, actually) diaphragm.  You can find those everywhere.  Talk to Toni Fishman at http://www.vintagetones.com.  He can set you up.

Logged

brett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1114
Re: AKG 414 EB wanna be.....
« Reply #5 on: July 17, 2008, 02:19:25 AM »

they sell on ebay for about 500
Logged

kriley

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: AKG 414 EB wanna be.....
« Reply #6 on: July 22, 2008, 11:01:58 PM »

If your really looking for some wicked overheads i have had great results with a matched pair of viennas ADK inexpensive but super effective has a great carve in the low mids
Logged

Galil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 122
Re: AKG 414 EB wanna be.....
« Reply #7 on: July 31, 2008, 08:41:16 AM »

Speaking of a 414 wanna be:

www.sweetwater.com/store/detail/C214

Galil
Logged

Barry Hufker

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8228
Re: AKG 414 EB wanna be.....
« Reply #8 on: July 31, 2008, 11:28:56 AM »

214 because it's half the mic a 414 is?
Logged

bigbone

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1297
Re: AKG 414 EB wanna be.....
« Reply #9 on: August 01, 2008, 06:57:21 PM »

Barry Hufker wrote on Thu, 31 July 2008 11:28

214 because it's half the mic a 414 is?



Even half a 414 if better than a full chinese mic..... Laughing
Logged

hargerst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1458
Re: AKG 414 EB wanna be.....
« Reply #10 on: August 02, 2008, 02:03:10 PM »

bigbone wrote on Fri, 01 August 2008 17:57

Barry Hufker wrote on Thu, 31 July 2008 11:28

214 because it's half the mic a 414 is?



Even half a 414 if better than a full Chinese mic..... Laughing

Aw, come on guys, not EVERY Chinese mic is bad.
Logged
Harvey "Is that the right note?" Gerst
Indian Trail Recording Studio

Larry Villella

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Re: AKG 414 EB wanna be.....
« Reply #11 on: August 02, 2008, 02:18:17 PM »


Well stated Harvey!


The S-7 has equivalent specs to the 214 at half the dough.

And . . . It comes in THREE FLAVORS!!!!


Cheers!


Larry V / ADK - the Exception to the Chinese Mic Syndrome


www.myspace.com/adkmic

www.adkmic.com

www.myspace.adkusers
Logged

Larry J. Villella, Founder, ADK Microphones

Barry Hufker

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8228
Re: AKG 414 EB wanna be.....
« Reply #12 on: August 04, 2008, 11:21:28 PM »

"Aw, come on guys, not EVERY Chinese mic is bad."

It's true.  The Law of Averages is against that.  At some point, one of them has to be good.
Logged

hargerst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1458
Re: AKG 414 EB wanna be.....
« Reply #13 on: August 08, 2008, 12:52:44 PM »

Barry Hufker wrote on Mon, 04 August 2008 22:21

"Aw, come on guys, not EVERY Chinese mic is bad."

It's true.  The Law of Averages is against that.  At some point, one of them has to be good.

Geez, I had a chance to buy a brand new 414B-ULS for $400, when a nearby music dealer went out of business.  I listened to it for several days, then gave it back.  I thought it was just as harsh as the Chinese mics people criticize here.

As far as Chinese mics, yeah, my first impression was that they were all shitty, with peaky high ends.

But, after trying a lot of different Chinese mics, my first impression changed. I found some really nice mics that didn't have that shrill sound and I'm happy to report that they were consistent in quality, since I tried several of the same model.

So yeah, I've got some Chinese mics here, and I'm not ashamed of it.
Logged
Harvey "Is that the right note?" Gerst
Indian Trail Recording Studio

Barry Hufker

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8228
Re: AKG 414 EB wanna be.....
« Reply #14 on: August 12, 2008, 11:46:53 PM »

I agree totally about the 414 ULS.  I had a pair of 414B ULS and couldn't get rid of them fast enough once I came to know them well.

I'm just ragging on Chinese mics.  I'm sure there are fine models and brands.  It was an easy target so I took my shot.

Logged
Pages: [1] 2  All   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 18 queries.