OTR-jkl wrote on Thu, 27 May 2004 08:19 |
The "Off" position on the MAN unit should read "Standby"...
|
Mine has a "on" position and a "sports" position. But in the sports position is incorporates an optical sensor that automatically switches the unit into the "on" position. When setting up the opamp on the input section I had to incorporate some lookahead circuits that filter out sweats, I call it the LPF inverter, or Lingerie Pass Filter inverter which keeps Lingerie from being filtered out. My biggest problem right now is that I have 2 smaller prototype woman models based upon the full version, they take up about 1/3 the space but they interfere with my optical sensor and cause power interrupts that causes the LPF to fail more often than not. Sometimes the switch gets stuck on the sports position because of the prototypes interference problems. I wish I could afford the blue stepped attenuator so I can return to previous settings faster.
Peace,
Dennis