R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Otari MTR90mkII Autolocator  (Read 2188 times)

Underwater

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Otari MTR90mkII Autolocator
« on: May 25, 2004, 03:27:19 AM »

Hello

I recently bought a MTR90mkII machine without an Autolocator. Now I can get a CB120 Locator that was built, I think , for MTR 100 machines. A friend of mine told me that i can use this Locator  with my machine. I only need to do some Modifications either at the machine or the locator, he couldn´t tell me what to do.
Maybe you can tell what modification i have to do to get the locator working with my machine.

Thank you in advance

Underwater

 
Logged

Jakob Erland

  • Full Member
  • ***
  • Offline Offline
  • Posts: 203
Re: Otari MTR90mkII Autolocator
« Reply #1 on: May 25, 2004, 06:52:03 AM »

The CB120 was designed for use with the MX70, MX80, and MTR10/12 recorders. To use it with a MTR100, you need to rebuild it (or possibly have a version that is later than ours). Something with tach direction and frequencies, I think.

But..

The CB120 SHOULD work with MTR90-II also - see section 4 in the CB120 operation manual:

SW33 dip switch, sections 33.5 33.6 33.7 - set to on, on, off for MTR90-II

Only you'll have to do a minor modification to get the "rehearse" function working well on the MTR90

Some otari manuals here:
http://classes.berklee.edu/mpe/pdf_files/manuals_pdf/

Jakob E.

Logged
..note to self: don't let harman run your company..
Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.03 seconds with 15 queries.