Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[breathe]

I love my PM-2000 but it has its quirks.  I recently realized when bringing up a stereo pair of channels (I almost never work with stereo tracks) that one channel was lower than the other by more than 3db.  I tested other channels on the board and noticed that they all had different levels from each other at the same fader settings.  Is there a reason for this? Have you experienced this?  Any solution?

Thanks!!!
Nicholas

[NelsonL]

Might be a good thread for the Tech forum---

I'm no expert, but has your board ever been recapped?

[marcel]

Sorry, I don't know these desks, but do the channels have line amps on input?

Can you match gain with those (use a test tone, zero faders, and match the outputs)?

Best, Marcel

[Fletcher]

This might be best in the tech forum... Dave Hecht did quite a bit of work to mine and it's been working well... he may indeed have some better ideas on the subject.