R/E/P Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: framing diagram  (Read 2037 times)

Dusk Bennett

  • Full Member
  • ***
  • Offline Offline
  • Posts: 108
framing diagram
« on: December 02, 2008, 01:35:36 PM »

I'm putting together a booth and I need some sort of formula or diagram that shows the proper way to frame and install acoustical windows into a booth/CR.

Currently I have two pieces of acoustical glass 32x40 but I'm not sure of the following:

1. What the angle of the glass should be (roughly)
2. What sort of membrane I should set the glass on, if any
3. How big the opening should be for this size and angle
4. How much rock salt will be sufficient for moisture absorbtion between the panes.

Of course a proper framing diagram would help explain alot of this but the books I have looked in do not have any.

Anyways I'd like to help the contractors do the job according to a plan but I need one to begin with. Any ideas?

I've also posted this in the Whatever Works forum in the event that's a more appropriate place to put it.
Logged
----
Dusk Bennett
Artist Development/Production
Audio Engineering
Los Angeles CA
www.duskbennett.com

C.Cash

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1889
Re: framing diagram
« Reply #1 on: December 02, 2008, 02:06:36 PM »

Logged
><><><><><><><><><><><><><><><><><><><





Pages: [1]   Go Up
 

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.074 seconds with 22 queries.