R/E/P > Whatever Works

Good EQ and Comp plugs for AU's

(1/2) > >>

Trash Monkey:
Specifically in native format. I guess I have to start working on OSX eventually. Hate to use this as a comparrison but does anyone offer anything even close to the old Bum Factory plugs? Despite Eriks complete lack of tact, those plugs still keep me in OS9/ DP3.11.

Fibes:
We are in exactly the same boat DP 3.11 here too.


URS makes some cool eqs (from what i hear). I'll be loading my PB up with DP4 soon as a beta tester. They've got demos... I'm not sure if they've got AU yet.

PSP audioware has a new eq. I'm going to try that too when it hits AU.

I personally would like to see the UA stuff native for AU, latency from the card does not excite me.



Any others?

G-Dub:
Take a look at Equim and Firium from Elemental Audio.
http://www.elementalaudio.com

They also have Inspecter a Free spectrum analyzer, peak meter great for detectng troublsome frequencies.

Trash Monkey:
Fibes wrote on Thu, 29 April 2004 13:56
We are in exactly the same boat DP 3.11 here too.


URS makes some cool eqs (from what i hear). I'll be loading my PB up with DP4 soon as a beta tester. They've got demos... I'm not sure if they've got AU yet.

PSP audioware has a new eq. I'm going to try that too when it hits AU.

I personally would like to see the UA stuff native for AU, latency from the card does not excite me.



Any others?



I did speak to MOTU tech about a month ago concerning the automatic latency compensation for the UAD-1 and Powercore cards and was told with no uncertainty that the programmers were working on the update and we would see it this year (Motu translation March of 2005) I like the idea of the powered cards but I'm no math wizard and figuring out the amount of offset to compensate for the cards latency does not appeal to me.

Dan-O:
Trash Monkey wrote on Thu, 29 April 2004 15:48
Fibes wrote on Thu, 29 April 2004 13:56
We are in exactly the same boat DP 3.11 here too.


URS makes some cool eqs (from what i hear). I'll be loading my PB up with DP4 soon as a beta tester. They've got demos... I'm not sure if they've got AU yet.

PSP audioware has a new eq. I'm going to try that too when it hits AU.

I personally would like to see the UA stuff native for AU, latency from the card does not excite me.



Any others?




I did speak to MOTU tech about a month ago concerning the automatic latency compensation for the UAD-1 and Powercore cards and was told with no uncertainty that the programmers were working on the update and we would see it this year (Motu translation March of 2005) I like the idea of the powered cards but I'm no math wizard and figuring out the amount of offset to compensate for the cards latency does not appeal to me.


While I'm not familiar with DP and it's architecture, the UAD-1 has a delay compensation plug that can be configured for sends and busses. A pain yes, but before Sx had PDC it worked just fine. Dose this not apply to DP?

Navigation

[0] Message Index

[#] Next page

Go to full version