hey dennis, good to see you here.
everything is REALLY close to being done. almost time for you and mikey to jump in a car and head down here.
anyway.....i got pictures
current status of room:
Front Walla little blurry, but you'll get the point here....
Front Wall 2now, if you notice to the right of the console is a 17" apple display that has been rack mounted with a shelf for a keyboard and trackball.
above all that are my patchbays. people have been asking how i did all that.
first off, the rackmount kit for the apple display is from marathon computers.
secondly, my dad picked up a nie piece of polished aluminum for the keyboard shelf.
i marked it all up and used a drill press to drill it out, and mounted it to the display rackmount.
seemed a little flimsy so we picked up some good angled aluminum and cutting wheel for the table saw.
i cut it to size, and then cut a 45 degree angle of the front supports so i don't cut my legs up moving under it......
used a mill file to get all edges smooth
first pic is of the rear view
Rear viewfront view
Front viewinstalled view
Install view