I was wondering if you guys could give me some advice and comments on my studio acoustics plan.
I've drawn out a diagram of what I was planning to do.
I'm in a Townhouse with drywall walls, cinder blocks between houses.
The treatment is for the inside acoustics mostly - not to stop sound carrying.
I was thinking about using 2' x 4' x 4" Rock wool covered with burlap. One in each corner, and three on the wall in front of the console, and three on the ceiling above the console.
Some specific questions I'm still tring to solve:
• There is a small bit of back wall behind me, maybe 12 ft back. I was thinking a diffuser would be good there.
• I only have treatment in the wall corners, not the ceiling corners. Do I need to address that?
• I'm wondering if I need three basstraps on the facing wall, and three on the ceiling - would two do?
• The monitors (Mackie HR 824) will be very close to the wall on Sound Anchors. I'm concerned it's too close, but the 38% rule sort of pushes me there.
What do you guys think of this plan?
Quote from Ethan.