Hi Oliver and all,
I have two telefunken v672/2 modules which I want to rack.
I have few question regarding the connection of the modules.
In one place, I was told that the input goes to pins 1&2. others said that the input goes to 7&8 and the input impedance goes between pins 1&3 and 2&4.
Im planning to make a switch of two impedances. one position will be suitable for ribbons, the other for condensers and dynamic mics.
what impedances should I use?
What potentiometer value would you use for the gain control? I was told that a resistor in series with the put is vital, is that so, if so, what resistor value?
I hope this isn't a rude thing to ask for this information, since this is your work.(no sarcasm!)
thanks,
eliya.